Special pins to attach your targetface on the target. This is a special kind of big thumbtacks that stay put in both straw and foam targets.
Sold per 4 pieces.
High-quality nock from Beiter with a diameter of .166.
This nock is asymmetrical, an asymmetrical nock is a nock that is not equal at the top and bottom. These nocks are mainly used by Recurve and Barebow archers, because they do not pull the string symmetrically. With an asymmetrical nock you ensure that the arrow leaves the string on the right side and this improves the arrow flight.
These nocks are suitable for small diameter shafts of:
Black Eagle
Victory
Gold Tip
Skylon - 4.2 series
Features Beiter .165 Asymmetric Insert Nocks
Weight: 6.1 grains (0.40 grams)
Nock fit: Size 1 (Small Groove) or 2 (Large Groove)
Material: Plastic
Installation: Make sure that the Beiter logo is always visible at the top.
The Beiter Clicker Black Blade is one of the most used clickers on the market. It is easy to install and in-use, plus this Beiter Clicker fits on almost every riser.
The Beiter Hunter nock is a symmetrical nock by Beiter, especially designed to be used with a D-loop. Using a D-loop is the only way to have the nock symmetrical on the string. This nock fits on most arrows of the biggest diameter, like the Easton X23, and is available in several colours.
Features Beiter Hunter Nock:
Symmetrical designEspecially for D-loop archersGerman quality and design
The Rip Clutch by Beiter is the ideal addition to your workbench to hold your bow for you when tuning your bow or if you are looking for a neat way to store your bowwhile still wanting it at the ready.
The Beier Bow Holder Vise is a great tool when mounting accessories to your bow or to control the limb alignement. Thanks to the 360 degrees rotation, you can hold the bow in almost each position you need!
Specifications Beiter Bow Holder Set Vise:
Rotation: 360 graden
Details set:
Beiter Rip-Clutch Square with Adapter 5/16"- 24"
Beiter Rip-Clutch Round with adapter 5/16"- 24"
The Beiter Limb Tip Line Gauges help to determine limb straightness and torsion. The Beiter Limb Tip Line Gauges must be placed between the string and the limbs: this avoids the string to be retained in the string groove and shows if the limb alignment is good.
The Beiter Armguard perfectly meets the needs of all the archers since introduction, preserving the archer’s front part of the arm from being injured by the string.
It is possible to combine more Armguard bodies, to make the surface bigger.
Each Armguard is delivered with 2 rubber bands and 2 Fasteners, which holds the Armguard in the desired position. The tension of the rubber bands can easily be changed pressing with only two fingers on the Fastener. The Beiter Armguard is available in a wide variety of colours from which the archer can choose: 19!...13 of those are the same colours as the Beiter Nock!
All parts are available separately! So you can combine different items (body or fastener) to better suit your national flag or the colours of your club.
The Beiter Armguard Soft is the upgraded version of the well-known Beiter Armguard. Made of even more flexible material and equipped with 3 straps and closures so that the arm protector forms perfectly along the arm.
The Beiter plunger button has been a staple product in the archery world for over 30 years. Developed in the eighties and improved upon since then, this plunger proves to be a beautiful piece of engineering. The engraved numbers in the body make it easy to test different setting to then put it back to the original setting if needed. The shaft is made of Stainless Steel and the body is made of anodised aluminium For most modern recurves, we recommend the 17,5-23,0mm size.
This Beiter Serving Winder is one of the most used serving tools by advanced string builders. Because of the weighted screws on the ends of the tool, it's easier to get a consistent tension in your serving. All parts for this winder are also available seperately which means that if something is worn out or broken, it's easy to replace to get you going again.
An asymmetrical nock is a nock that is differently shaped on the top and bottom side. These nocks are often used by recurve archers, since the way they hold the string makes for an asymmetrical shape in the string. The asymmetry of the nock will compensate for this when releasing, making for an easier to tune arrow in some cases.
These nocks are suited for use with all standard pins. You can not use these nocks without the use of a pin in the back of the arrow.
Models
Asymmetric #1 - Small Groove
Asymmetric #2 - Large Groove
High-quality nock from Beiter with a diameter of .166.
This nock is asymmetrical, an asymmetrical nock is a nock that is not equal at the top and bottom. These nocks are mainly used by Recurve and Barebow archers, because they do not pull the string symmetrically. With an asymmetrical nock you ensure that the arrow leaves the string on the right side and this improves the arrow flight.
These nocks are suitable for all Easton shafts that can accommodate a G-Nock, below are some examples:
Easton XX75 Platinum Plus 1416 to 1916
Easton XX75 Jazz 1214 to 1916
Easton X7 Eclipse 1514 to 1914
Easton Vector
Easton Carbon One
Easton Avance
Easton A/C/E
Easton Procomp
Features Beiter .166 Asymmetric Insert Nocks
Weight: 5.54 grains (0.36 grams)
Nock fit: Size 1 (Small Groove) or 2 (Large Groove)
Material: Plastic
Installation: Make sure that the Beiter logo is always visible at the top.
This nock from Beiter is asymmetrical and specially designed for the larger diameter aluminum shafts, but over time it has also become increasingly popular when using carbon shafts.
An asymmetrical nock is a nock that is not equal at the top and bottom. These nocks are mainly used by Recurve and Barebow shooters, because they do not pull the string symmetrically. With an asymmetrical nock you ensure that the arrow leaves the string on the right side and this improves the arrow flight.
These nocks are suitable for shafts that can accommodate an S-Size nock, for example:
Easton XX75 Platinum Plus 2016 to 2315
Easton XX75 Jazz 2016
Easton X7 Eclipse 2014 to 2315
Easton Gamegetter
Easton X23 & X27
Easton RX-7
Most 5/16 carbon shafts that will accept an S-Size nock
Features Beiter 19 Asymmetric Nock
Weight: 10.6 grains (0.69 grams)
Nock fit: Size 1 (Small Groove) or 2 (Large Groove)
Material: Plastic
Installation: Make sure that the Beiter logo is always visible at the top.
The Beiter Push'N'Pull is a handy tool with which you can easily install, turn or exchange both symmetrical and asymmetrical nocks. The ergonomic design allows even the most stuck nocks to be turned or removed without damaging the shaft.Available in 3 models:#1 (Black)#2 (Orange)Hunter (Green)
With the Beiter Nockdepot you can easily store your nocks, put it in your bag or hang it on your quiver (through the holes on the side it is possible to attach a ring or string to it). 6 Nocks can be clicked on both sides of the nock depot, so a total of 12 nocks fit on 1 depot.In addition to storage, the nock depot can also be used to install or align your nock on the shaft.Available in 3 models: #1 (black)#2 (orange)hunter (green)