Arrow Building

Solvent based fletching glue from Bohning. Key features: Designed for securely gluing vanes and feathers. Appropriate for aluminium, carbon, wood and fiberglass shafts. Slow curing glue where bond increases over time. Flexable and durable. Clamp for 5 minuites and glue cures fully in 48 hours.

The Bearpaw dosing tip is extremely fine and precise! It guarantees the best glueing results and helps you put on the right amount of glue. Apart from that, dosing tips have a tendency to get clogged up after use. Therefore, we recommend ordering a few extra dosing tips with the Bearpaw Archery Glue to be ready to replace.Delivery per piece.

Considered by many as the best glue on the market. Suited to glue nocks, feathers and vanes on aluminium, carbon and wooden shafts. Not only is this glue used by many archers that like to make their own arrows, also profesionals like to use this glue. We use the Saunders Arrow Mate Cement for the natural feathers on our custom arrows, it works great and leaves no residue on the shaft when you need to replace a feather.

The Avalon Fletching jig is a nice budget option if you want to start making your own arrows. The jig is made from aluminum, making it light and compact, comes with one straight clamp and can fletch 3 or 4 feathers to the shaft.

This Bearpaw instant glue is specially made without harmful solvents, without compromising on the quality. This way you don’t suffer from harmful and irritating fumes when making arrows. This glue is suited for all materials, so you don’t need a lot of different glues. Bearpaw instant glue is suited for glueing feathers and vanes on different shafts (wood, carbon, aluminium and fiberglass). And also to glue nocks.

The double-sided fletching tape is used worldwide for the swift and durable fletching of wooden, aluminium and carbon arrows. Its extremely simple and quick handling enthuses both archers and bowyers worldwide. Length: approx. 1830 cm (720 inches) Quality: Made in Germany

Hot melt adhesive from Bohning. A 12gr stick which works at low temperaturs. This prevents you from accidentical overheating your shafts or components. Key features: Optimised for installing arrow points and inserts. Provides a durable and impact resistant bond. Suitable for all aluminium, carbon and wooden shafts. Heat reversible bond for adjustment, replacement or removal

This white marker of Avalon is extremely useful to provide your arrows with your initials. Everyone will know these arrows are yours! The thin nib of 0.7 mm ensures that you can work with precision and detail.

The Taper Tool made of plastic is the world’s most widely used tool to attach the cone for tip and nock to wooden arrows. Absolutely simple and reliable in its handling, it convinces archers in their daily use. Features Material: PlasticSizes: 5/16, 11/32, 23/64 inches

Hot melt adhesive from Bohning. Key features: Optimised for installing arrow points and inserts. Provides a durable and impact resistant bond. Suitable for all aluminium and wooden shafts. Heat reversible bond for adjustment, replacement or removal. 12g stick sufficient for installing approximately 144 inserts.

Gold Tip Glue for carbon shafts. For Feathers, vanes, inserts and gue-in points. 10gram.

AAE Max Bond Glue is specifically formulated for the Arizona Plastifletch Max and Max Hunter vanes. This glue also works well with Elite Plastifletch and most other plastic vanes. Max Bond is a high-viscosity liguid that is easy to work with and penetrates well when using the tough Elastimax material. Whether you are fletching carbon or aluminum, this is the toughest glue available. Features: Suited for carbon or aluminum shafts Works best with vanes Containes 20gr.

Easton Hotmelt is suitable for assembling points and inserts in aluminium, aluminium/carbon and carbon shafts.Length: 10 inch / 25cm

The Easton Glue Insert Adhesive is designed especially for inserts. Whether you use carbon or aluminum shafts, this glue works! This glue is desgined to be impact resistant. Bottle contains 15ml.

Spare Blade for the plastic Bearpaw Taper Tool. A sharp blade will always yield better results than a blunt one when tapering arrows.

With this tool you can mount parallel screw-on points on wooden shafts. The TopHat® Assembly Tool is suited for arrows of all diameters. Size: 14 cm x 4 cm Developed in colleboration with Pfeilgeräte Brand.

The TopHat®Thread Roughing Tap is a preparation tool for your shaft. It will roughly form threads for parallel screw on points. The rough thread makes attaching points more consistent and smooth. Features Material: Stainless SteelAvailable sizes: 5/16, 11/32 and 23/64 InstructionsUse the  TopHat®Assembly Tool to hold the TopHat®Thread Roughing Tap and screw it all the way on to your shaft, now remove the tap and screw on your point.

The Bearpaw Fletching Tool Deluxe is a very accurate fletching jig. The developers of Bearpaw Products were able to combine the experience of Henry Bodnik and the needs of archers. Many individual adjustment options ensure the best and most accurate fletching of your arrows. The basic construction of this functional unit is made of a heavy metal, in order to guarantee both quality and durability. Together with the available base plate, you can easily expand your fletching tool in steps of 3 to a multiple fletching system. You can easily fletch your arrows straight, rightwound or leftwound with our fletching tool. A masterpiece of German engineering Features – Can switch easily from 3- to 4- or 6-fold fletching– Precision holder for thinner and thicker arrow shafts– Centering of the nock– Individual fine tuning for perfect fit of the fletch or feather– Comes with a straight, helical RW or Helical LW clamp German Quality

Two component epoxy glue is used to glue points on wooden shafts. This glue won’t become super hard but will stay a tiny bit flexible, this will absorb a bit of the impact of the arrow in the target.

The Gas Pro Hot Melt is used for points and inserts with aluminum and wooden shafts. If you want to replace your point all you need to do is heat the point a bit and the glue will become liquid, so you can replace your point without damaging the shaft. The stick Gas Pro Hot Melt is about 20 cm long.

With the Cross-X Fletching remover you can remove every vane or feather from your arrow shaft in an instant. You can also easily remove glue residue from loose feathers. Thanks to the round curved blade, this stripper fits nicely around a shaft, allowing the feathers to be removed very effectively.

The Decut PCOcut is a great tool to have when you like to make your own arrows. The arrow cutter makes it really easy to cut your carbon, aluminum or wooden shafts to the right size. The cutter works with a foot pedal. Features – 220 volt motor speed. – Spare blade included. – Quality product at a competitive price point.

Easton's Vane Primer Pen degreases the vanes, ensures better adhesion and shortens the drying time. Compatible with all vane adhesives.

Perfect compact and lightweight scale to weigh shafts, points, vanes, nocks etc. Very useful tool when you like to make your own arrows. Features Total size: 5″ x 3″ x 3/4″ inch Total weight: 5 oz, with batteries Capacity: 100g x 0.01g Batteries: 2 x AAA included Auto-off power saver mode Backlit LCD screen 771 grain max with.15 grain accuracy Measures to the nearest tenth (.1) Self-contained protective case

With the TopHat Shaft Shaper it is possible to compress your arrow in a responsible way so it has the right diameter for placing a parallel point. Wood might slightly vary in diameter, with this tool you can make the discrepancy dissapear. Features Material: Stainless SteelLength: 50mmSizes: 5/16 or 11/32 TopHat®Shaft shaper technology:The TopHat® Shaft- shaper set is composed of ftwo elements. A basepiece can be placed on the drilling machine and the desired attachement can be placed on the basepiece. Put the drilling machine on a slow speed if possible. The shaft has to go into the attachement until it can’t go any further, keep doing this until there is no resistance.

The Replacement Clamps for the Bearpaw Fletching Tool Deluxe is made from a robust and resistant material. They guarantee high functionality and longevity. The clamps are built to precision to ensure a high degree of accuracy in fletching. The form of the wound clips was built in such a way as to be able to press the full surface of the feather quill to the shaft. Features Versions: clips rightwound, leftwound and straightGerman Quality

The ATA (Archery Trade Association) has determined the exact measurements and specifications for taper tools. The amount of angle and the length of the taper to be cut are precisely specified. This ensures that all tips and nocks fit perfectly on your wooden arrows. Features Material: AluminiumContents: 3x shaft adapters – 5/16 inches, 11/32 inches, 23/64 inches

Features Spin Wing Wrapping Tape - 4 feet: Tip and tail tape to secure your spin wings tightlyLength: 4 feet Available in colors: Black/Silver/White

Archers all over the world use conical points with screw thread for their wooden arrows. At miss-shots arrows often penetrate deeply in branches or timber and can be damaged when pulled. With screw points the arrows can then easily be unscrewed from the tip. With the Arrowpoint Puller it is a breeze to pull the point out of the wood with a sharp tug. Material: aluminium Use: for points with conical screw thread in the sizes of 5/16 inches, 11/32 inches, 23/64 inches Quality: Made in Germany

With it’s 3 grooved razor sharp-edges, any vane of any shaft is easily removed, as well as any residual adhesive. Compact and easy to store due to it’s foldable design which also protects the blade. With the integrated locking mechanism, it is not possible to accidentally close the blade. 4 different sized slots for adjusting a wide variaty of nocks. Handle made out of aluminum and is available in 3 anodized finishes.

Spare blade for the Bearpaw Taper Tool Deluxe ATA.

Fletching arrows is a time-consuming activity? Not with this Avalon Fletching jig. With 6 straight clamps, a full set of 12 arrows is ready 6 times as fast as before. Instruction manual included.

With the Beiter Nockdepot you can easily store your nocks, put it in your bag or hang it on your quiver (through the holes on the side it is possible to attach a ring or string to it). 6 Nocks can be clicked on both sides of the nock depot, so a total of 12 nocks fit on 1 depot.In addition to storage, the nock depot can also be used to install or align your nock on the shaft.Available in 3 models: #1 (black)#2 (orange)hunter (green) 

The Avalon Arrow Inspection Spinner is the ideal tool to check if your arrows are straight. Due to the smooth bearings and solid base, it's easy to see if your shafts, points or pins are completely straight. The spinner is adjustable in length to inspect shorter zones or the arrow and the rubber feet prevent it from slipping.

An important tool for the production of your own carbon or aluminum arrows. You increase the adhesion of the insert, if you brush the inside of the carbon or aluminum shafts with this steel brush. This size is suitable for shafts with a diameter of 5/16 and bigger, for smaller diameter shafts we recommend using the Steelbrush Slim. Features Diameter: 6 mm (0.24 in) Material: Steel Quality: Made in Germany