Other Tools

With the Avalon Arrow Marker Pen, you can easily mark your arrows with initials, numbers or small guide lines. Useful for keeping your arrows easy to identify during training and competitions, but also when building or tuning your arrows. The white marking is clearly visible on many dark shafts. Thanks to the fine 0.7 mm tip, you can work accurately, for example when numbering arrows or marking vane positions.

With this tool you can mount parallel screw-on points on wooden shafts. The TopHat® Assembly Tool is suited for arrows of all diameters. Size: 14 cm x 4 cm Developed in colleboration with Pfeilgeräte Brand.

With the Cross-X Fletching remover you can remove every vane or feather from your arrow shaft in an instant. You can also easily remove glue residue from loose feathers. Thanks to the round curved blade, this stripper fits nicely around a shaft, allowing the feathers to be removed very effectively.

The Decut PCOcut is a great tool to have when you like to make your own arrows. The arrow cutter makes it really easy to cut your carbon, aluminum or wooden shafts to the right size. The cutter works with a foot pedal. Features – 220 volt motor speed. – Spare blade included. – Quality product at a competitive price point.

Perfect compact and lightweight scale to weigh shafts, points, vanes, nocks etc. Very useful tool when you like to make your own arrows. Features Total size: 5″ x 3″ x 3/4″ inch Total weight: 5 oz, with batteries Capacity: 100g x 0.01g Batteries: 2 x AAA included Auto-off power saver mode Backlit LCD screen 771 grain max with.15 grain accuracy Measures to the nearest tenth (.1) Self-contained protective case

Archers all over the world use conical points with screw thread for their wooden arrows. At miss-shots arrows often penetrate deeply in branches or timber and can be damaged when pulled. With screw points the arrows can then easily be unscrewed from the tip. With the Arrowpoint Puller it is a breeze to pull the point out of the wood with a sharp tug. Material: aluminium Use: for points with conical screw thread in the sizes of 5/16 inches, 11/32 inches, 23/64 inches Quality: Made in Germany

With the Beiter Nockdepot you can easily store your nocks, put it in your bag or hang it on your quiver (through the holes on the side it is possible to attach a ring or string to it). 6 Nocks can be clicked on both sides of the nock depot, so a total of 12 nocks fit on 1 depot.In addition to storage, the nock depot can also be used to install or align your nock on the shaft.Available in 3 models: #1 (black)#2 (orange)hunter (green) 

With it’s 3 grooved razor sharp-edges, any vane of any shaft is easily removed, as well as any residual adhesive. Compact and easy to store due to it’s foldable design which also protects the blade. With the integrated locking mechanism, it is not possible to accidentally close the blade. 4 different sized slots for adjusting a wide variaty of nocks. Handle made out of aluminum and is available in 3 anodized finishes.

Arrow straightening tool from Cartel. Features: For use with aluminium shafts. Extend the life of you arrows. Ideal for club and beginner shafts.

The Avalon Arrow Inspection Spinner is the ideal tool to check if your arrows are straight. Due to the smooth bearings and solid base, it's easy to see if your shafts, points or pins are completely straight. The spinner is adjustable in length to inspect shorter zones or the arrow and the rubber feet prevent it from slipping.

Replacement blade for the Decut PCOcut arrow cutter. Quantity: 1 piece

Features Decut Mini-Cut Arrow Cutter:220 Volt50 Hz

The Beiter Push'N'Pull is a handy tool with which you can easily install, turn or exchange both symmetrical and asymmetrical nocks. The ergonomic design allows even the most stuck nocks to be turned or removed without damaging the shaft.Available in 3 models:#1 (Black)#2 (Orange)Hunter (Green)

The Bohning The Strip Pro Vane Stripper is a great tool for removing old vanes and feathers from the shaft. This vane stripper has two ways of use, so you can switch positions while using the stripper, very ergonomical when you have to remove a lot of vanes. The blades last a long time but when they do come to their end you can order replacement blades instead of having to buy a whole new stripper.

Features Shocq Digital Grain Scale: Measures in grains/grams/ounces/carats Backlit digital display allows for easy reading Auto-Calibration Portable and lightweight Protective case included

Many shooters of wooden arrows still prefer selfnocks sawed directly into the shaft. It is extremely important to saw selfnocks into the shaft in a centered way. The Self Nocker Plus is a masterpiece of German craftsmanship! The shaft is centered automatically to perfectly saw the nock into the center of the wooden shaft. The integrated collet chuck clamps wooden shafts of all diameters securely and firmly in the tool. Features Material: aluminium with spring steel collet Use: wooden shafts of diameter 5/16 inches, 11/32 inches, 23/64 inches Quality: Made in Germany

The Pine Ridge Arrow Inspector helps you check the straghtness of your shafts and alignment of your arrows and components. Also great to use when building wooden arrows to see which side of the shaft you should cut. The inspector is made from high quality plastic, has aluminum wheels for friction free spinning and is easy to dismantle for storage or transport.

Features OMP Digital Arrow Scale:Includes arrows and accessory holder Weighs in grains only 3086 grain max 0.2 grain accuracy

Set of 3 spare blades for the Bohning arrow stripper ‘The Stripper’

Features Easton Point Weight Tool Suitable for mounting weights in the Easton Adjustable Glue in Points Easily and quickly screw weights in and out of the point without having to remove the point from the shaft

Spare blades for the Bohning Strip Pro. 3-pack.

Features Decut Digital Mini Scale:Comes with tweezersExtra weight includedMaximal weight: 20 g / 300 gr. Precision: 0.001 g / 0.02 gr Measuring units: g, tl, dwt, gr., ozt, oz, ct, mg Powered by 2 x AAA batteries (included)