Stabilizer Dampers

The Infitec Crux Damper is a highly versatilevibration absorbing rubber damper Specifications: Versatile vibration absorbing rubber damper Great for using on the ends of stabilizers and side rods Designed to accept the conversion screw 1/4″-20 to 5/16″-24 to be installed directly to the riser Weight: 56 grams, (865 grains)

The Avalon Tec Damper is a vibration absorbing rubber damper. This damper is suitable for any stabilizer with a 1/4" end, and is very easy to install. Specifications Avalon Tec Damper: Material: rubber Diameter: 21 mm Thread: 1/4″ Suitable for: stabilizers with 1/4" thread ends

The Avalon Tec Damper is a vibration absorbing rubber damper. This damper is suitable for any stabilizer with a 1/4" end. Specifications Avalon Tec Damper: Material: rubber Diameter: 31 mm Thread: 1/4″ Suitable for: stabilizers with 1/4" thread ends

Damper from Winners. Specifications: Optimal for use on stabilizers, particularly short rods. Reduces shock and vibration on shot execution.

This Avalon Maxx Damper is a stabilization damper for the front of your stabilizer. Because this damper has an adapter to 5/16" in addition to a 1/4" connection, this damper is suitable for almost any stabilizer.

Stabilizer Damper from Avalon with a 1/4" connection.

A damper from Ramrods that works on a different principle than rubber dampers. The damper has a cavity which is partly filled with Tungsten powder. The tungsten powder absorbs the blows of shooting and removes vibrations. Because Tungsten is a very heavy metal, it also acts as a weight.Specifications Ramrods Tungsten Damping WeightMaterial: AluminumFilling: TungstenThread: 5/16(Large) Weight: 4oz (112 grams)

Features Avalon POWR Stabilization Damper: Damper for the Avalon POWR stabilizer With screw set (1/4 inch and 5/16 inch)

Damper from Winners. Specifications: Optimal for use on stabilizers, particularly long rod. Reduces shock and vibration on shot execution.

A stabilizer damper made of rubber. With a 1/4 inch thread.

The Arctec Damper set can be used on the Arctec Crosstube stabalizers (short and long). Handmade in Solingen, Germany Specifications: – Material: aluminum, rubber

Features Focus Performance Stabilizer Weight: CompactMade of high-density material The thread ensures a secure fit Corrosion-resistant finish

The colored version of the Beiter V-Box Basic Kit. The two mounting plates are made of anodized aluminum. An adjustable damper for your bow or stabilization. The basic kit includes four different membranes to adjust the stiffness. This way you can fine-tune the damper to your shooting style and amount of weight.Each membrane has a maximum weight at which the damping is optimal.Maximum weight support per membrane:Membrane #1: 5 oz Membrane #3: 5 oz Membrane #5: 10 oz Membrane #7: 10 ozBeiter V-Box Damper Basic Kit ColorMaterial: Plastic with Rubber MembraneThread: 5/16"-24 UNFDiaphragms: #1, #3, #5 and #7Colors: Red, Blue, Orange, Green and Purple

Mounting blocks to upgrade your current V-Box damper to a colored aluminum version. You get two blocks per set. So that is the top and bottom for a single damper. This kit is without membranes.Features Beiter V-Box Damper Color Upgrade KitMaterial: Anodized Aluminum Thread: internal 5/16" UNF

An upgrade kit to replace your plastic mounting blocks with stainless steel blocks. This makes the entire damper stronger and heavier. This kit comes without membranes.See here for more info about the upgrade. Specifications Beiter V-Box Damper Steel Upgrade KitMaterial: Stainless steelThread: 5/16"-24 UNF internal

Features Bicaster Polo-2 Damper Stabilizer: Material: Rubber Weight: 37g Diameter: 34.2mm 1/4-20” thread

Features Avalon Classic Stabilizer Damper: Damper for stabilizer Diameter: 18mm Thread: 1/4 Inch Color: Black

The same damper that comes standard with the Sebastien Flute Carbon Pro Stabilizers.This damper has 1/4 inch thread on both sides.