Other Arrow Parts

The TopHat Adapter is the perfect solution to be able to use screw-in points with your wooden shafts. The Adapter works the same way as an insert does, you can screw a point in it. This makes it really easy to change the weight at the front of the shaft. Of course you can use the Adapter with bullet, combo or field points. The Adapter needs te be screwd on the shaft, you don’t need to prepare the shaft for this. TopHat claims you don’t even need glue to install the Adapter to your shaft! The Adapter is slightly conical so it always centers perfectly! Features Material: AluminumDiameter: 5/16 and 11/32Weight: 40 grains

Rubber ring to prevent your screw points from vibrating loose. Available in 9/32 and 5/16.

Tophat® Paralleladapter Aluminum is the perfect solution to equip your wooden shafts with push in nocks. Great if you brake a nock or just want to replace one. The adapter is screwed on the shaft, no treatment of the shaft necessary. The TopHat® Paralleladapter is suitable with .244 – .246 nocks. Features Material: Aluminum Sizes: 5/16 and 11/32 Weight: 15.2 grain

These Skylon ID3.2 Collars (also called Protector Hats) are attached to the back of your arrow and offer protection when shooting a 'Robin Hood'. The Collar is placed between the shaft and the nock. Suitable for the Skylon shafts with an inner diameter (ID) of 3.2mm. Make sure you select the correct spine.

Weight module for the Easton Adjustable Glue in Point, these weights enable optimal arrow tuning. Features Easton Adjustable Glue-In Point for Aluminum Suitable for Easton Adjustable Glue in Points Available weights: 10, 20 and 50 grain Maximize your tuning options

Even the best archer sometimes misses the target. The TopHat Arrow Stopper makes sure your arrow doesn’t bury itself in the ground, wether you are shooting on grass, in a forest of even in snow. Ø 5-6,6mm Suitable for carbonshafts with an .166 ID to .204 ID (Like the Bearpaw Penthalon Slim Line and the Easton Axis Traditional)Ø 6,6-8mm Suitable for 5/16 wooden shafts and carbonshafts with an .244 ID (Like the Bearpaw Penthalon and Carbon Express Heritage)Ø 8-9,4mm Suitable for 11/32 wooden shafts and carbonshafts with an outer diameter up to 9,33 mm Features Material: High quality plasticSize/color: 5 – 6,5 mm (Pink, Yellow or dark blue), 6,6 – 8 mm (fluor orange, fluor green or black), 8 – 9,4 mm (fluor yellow or red)

The Gateway Feather Arrow Tracer give your aroows some extra visibility. They are very lightweight and add almost no extra weight. Comes in a set of 12 pieces. Features Colors: Charteuse, Orange, Pink, Red, White, Yellow.

Features XS Wings Wrapping Tape - Black: Top and tail tape to secure vanes tightly in place Pre-cut length, fits any shaft Perfect stretch and adhesion for optimal grip Per sheet 34 strips

Features Easton Point Weight Tool Suitable for mounting weights in the Easton Adjustable Glue in Points Easily and quickly screw weights in and out of the point without having to remove the point from the shaft

Features XS Wings Wrapping Tape - Color: Top and tail tape to secure vanes tightly in place Pre-cut length, fits any shaft Perfect stretch and adhesion for optimal grip Per sheet 34 stripsIn different colors available 

Features Skylon Instec ID5.2 Nock Collars: Material: Alu-7075 Inside diameter: 5.2mm For Instec 300/400/500/600/70012 pieces.

Features Skylon Quantic ID5.2 Nock Collars: Material: Alu-7075 Inside diameter: 5.2mm For Quantic/Micro Carbon 250/300/400/500/600/70012 pieces.

Features Skylon ID5.2 Point Collars: Material: Aluminum - 7075 Inside diameter: 5.2mm Spine: 300/350/400/500/600/700 Set of 12