The Easton Pin Adapter is the way to protect your arrows against a Robin Hood. When you shoot an arrow on the back of an other arrow, it won’t break the complete shaft but bounce of at the pin when using it.
These pins are available for spines 410 till 500 and 550 till 730. For spines lighter than that (810-2000) you can use the Easton Pin Adapter ACE.
Features Easton Pin Adapter:
Light weight pinTo be used with pin nocks by for example Easton or Beiter
Use: Size #1: ACE all spines, ProComp 1000 + 1150, Avance & Avance Sport 1400 t/m 2000
Size #2: ProComp 520 t/m 880, Avance & Avance Sport 730 t/m 1150
Size #3: ProComp 420 + 470, Avance & Avance Sport 550 + 660
Size #4: ProComp 250 t/m 380, Avance & Avance Sport 340 t/m 500
Bushing for shafts with an id of .246″. By placing a bushing the back of the arrow is reinforced, instead of placing a nock directly in the shaft you place a nock in the bushing. This reduces the chance of damaging the back of your arrow.
Features
Weight: 12.6 grain
Advised nocks: Easton G Nock
With these pin inserts from Skylon you can provide your set of Skylon Brixxon or Skylon Radius arrows with a pin nock. Without these pin inserts, the Pin Nocks will not fit and you need the so-called ID4.2 Innerfit nocks. The advantage of using Pin Inserts is that this metal pin protects the back of your arrow just a little better, useful when you occasionally shoot a 'Robin Hood'. Pay attention to the spine of your arrows, the different spines do not all have the same outer diameter, for a nice fit you need the right size. Supplied in packs of 12 pieces.
Easton aluminum bushing for the back of aluminum shafts. Suitable for Easton X7 or XX75 series aluminum shafts. These bushings fit Easton Super 3D Nocks or similar brands of 6.5 mm or .245/.246 inch Nocks.
These Avalon pin inserts are suitable for the Avalon carbon arrows like the Tyro and Hybrid. The insert is meant for the back of the arrow and serves as an adapter for pin nocks, like the Avalon Pin Nock. Please pay attention to the spine when, as it needs to match the spine of your arrow. You can find your spine noted on the arrow
Features Avalon Pin Insert:
Can be used in combination with a pin nock
Suitable for multiple spines
Delivery per 12
With these Pin Inserts from Skylon you can provide your set of Skylon arrows with a pin nock. Pin inserts give arrows just a little more strength at the back and protect the arrows when shooting a 'Robin Hood'.These Skylon ID3.2 Pin Inserts fit Skylon (or other brands) shanks with an ID of 3.2mm. Supplied in a set of 12 pieces.
Met deze Pin Inserts van Skylon voorzie je jouw setje Skylon pijlen van een pin nock. Pin inserts geven pijlen net even iets meer stevigheid aan de achterkant en beschermen de pijlen w bij het schieten van een 'Robin Hood'. Deze speciale DLX versie is voorzien van een extra geribbeld randje. Dit zorgt ervoor dat je met minimaal gebruik van lijm toch een goed hechtoppervlak hebt en de inserts beter blijven zitten.Deze Skylon ID3.2 Pin Inserts DLX passen op de Skylon (of andere merken) schachten met een binnendiameter (ID) van 3.2mm.Geleverd per setje van 12 stuks.
The pin adapter for all VAP Target arrows.Protects the back of your shafts. Fits with all pin nocks.Specifications Victory VAP Target Pin AdapterMaterial: AluminumDiameter: 0.166 inchQuantity: 12Weight: 13 grains
Pin adapters for Easton X10 shafts. Fits all shaft variants. Can be used with all types of pin nocks.Specifications Easton X10 Nock Pin AdapterMaterial: Aluminum
Diameter: 3.2mm
Quantity: Per 12
Pin adapters for Easton X10 Protour Shafts. Fits all shaft variants. Can be used with all pin nocks.
Specifications Easton X10 Protour Nock pin Adapter
Material: Aluminum
Diameter: 3.2mm
Quantity: Per 12
An aluminum Nock collar for the X10 and X10 ProTour. To protect the back of your arrows.Easton X10 Nock CollarMaterial : AluminumDiameter: #1(X10), #2(ProTour 670, 720 & 770), #3(ProTour 520, 570 & 620), #4(ProTour 420 & 470) and #5(ProTour 340 & 380)
