Dampers

Beaver Puffs are visually appealing silencers made of waterrepellent beaver fur. These puffs absorb the sound of the string and are use by many archers world wide. The Beaver Puffs come in a set of 2 pieces and an instruction guide.

The String Silencer Buffer is made of wool and absorbs the sound of the string. Comes in a set of 2 pieces and an instruction guide.

V-FLEX is a significant development in recurve archery technology. The revolutionary V-FLEX vibration dampener reduces string oscillation, noise and hand-shock, resulting in improved accuracy. Features Flex V-Flex: Its deep-groove design also increases the limb’s string groove length for shot-after-shot consistency Reduces bow string oscillation/vibration Reduces noise Reduces hand-shock Enhanced string groove for increased consistency Works on hunting, recreational and target recurves Can increase arrow speed up to 5 fps 3M Adhesive backing for quick/easy installation Weight: 4,3 grams per piece 2 V-FLEX per pack for one recurve bow

These dampers reduce the vibration and noise of recurve limbs. This helps with a smoother and quieter shot. The dampers are lightweight and available in different colors and can withstand all weather conditions. They are provided with a self-adhesive sticker so that they are easy to assemble. Specifications Limbsaver Recurve Broadband Limb Damper: Diameter: 1 3/8 inches Set contains two dampers

These waterrepellent string silencers by Saunders are easy to install and make the bow a lot more silent. Comes in a set of 2 pieces.

These handmade string silencers are a very good addition to any traditional bow! These Silencers make any bow as silent as a mouse and they are available in several colors. Because they are made of real wool, they absorb almost no water and they remain nice and round in the rain.The Silencers come in a set of two.

The Infitec Crux Damper is a highly versatilevibration absorbing rubber damper Specifications: Versatile vibration absorbing rubber damper Great for using on the ends of stabilizers and side rods Designed to accept the conversion screw 1/4″-20 to 5/16″-24 to be installed directly to the riser Weight: 56 grams, (865 grains)

The Avalon Tec Damper is a vibration absorbing rubber damper. This damper is suitable for any stabilizer with a 1/4" end, and is very easy to install. Specifications Avalon Tec Damper: Material: rubber Diameter: 21 mm Thread: 1/4″ Suitable for: stabilizers with 1/4" thread ends

The Avalon Tec Damper is a vibration absorbing rubber damper. This damper is suitable for any stabilizer with a 1/4" end. Specifications Avalon Tec Damper: Material: rubber Diameter: 31 mm Thread: 1/4″ Suitable for: stabilizers with 1/4" thread ends

These great looking “Whiskers” will not only add a touch of color to your string, but they will dampen un-wanted bow noise and reduce string vibration. They are easy to install and will last long.

Features Sanlida X10 Lat Dampers:Dampens the sound of the shot

The Avalon Tec X Riser Damper with weight wil improve your bow balance for better stability. Designed to be compatible with most recurve risers, which has a 5/16” thread mounting option. The damper greatly reduces the noise and vibration of your bow during the shot. Length: 3.5"

The Bearpaw Funny Puffs are made of real fur and absorb the sound of the string. These visually appealing silencers are handmade in the Bearpaw Factory. The Funny Puffs come in a set of 2 and an instruction guide.

Damper from Winners. Specifications: Optimal for use on stabilizers, particularly short rods. Reduces shock and vibration on shot execution.

This Avalon Maxx Damper is a stabilization damper for the front of your stabilizer. Because this damper has an adapter to 5/16" in addition to a 1/4" connection, this damper is suitable for almost any stabilizer.

The Maximal Hush Kit is a damping set for your compound bow that eliminates noise and vibrations. Available in three colors. The set exists of: 2x compound limb dampers 4x string dampers 1x cable guard damper

Stabilizer Damper from Avalon with a 1/4" connection.

A damper from Ramrods that works on a different principle than rubber dampers. The damper has a cavity which is partly filled with Tungsten powder. The tungsten powder absorbs the blows of shooting and removes vibrations. Because Tungsten is a very heavy metal, it also acts as a weight.Specifications Ramrods Tungsten Damping WeightMaterial: AluminumFilling: TungstenThread: 5/16(Large) Weight: 4oz (112 grams)

Features Bicaster Polo Riser Damper: Material: Aluminum, Special rubber Weight: Ca. 170g Length: 123mm 5/16"-24 thread 

Damper from Winners. Specifications: Optimal for use on stabilizers, particularly long rod. Reduces shock and vibration on shot execution.

An adjustable damper for your bow or stabilization. The basic kit includes four different membranes to adjust the stiffness. This way you can fine-tune the damper to your shooting style and amount of weight.Each membrane has a maximum weight at which the damping is optimal.Maximum weight support per membrane:Membrane #1: 5 oz Membrane #3: 5 oz Membrane #5: 10 oz Membrane #7: 10 ozBeiter V-Box Damper Basic KitMaterial: Plastic with Rubber MembraneThread: 5/16"-24 UNFDiaphragms: #1, #3, #5 and #7

Features: Silences the sound of the string Decreases vibration Suited for all kinds of weather Fits on every kind of bow

A stabilizer damper made of rubber. With a 1/4 inch thread.

A complete starter set of the Beiter V-Box. The Beiter V-Box is an adjustable damper for your bow or stabilization. The basic kit includes four different membranes to adjust the stiffness. This way you can fine-tune the damper to your shooting style and amount of weight. Each membrane has a maximum weight at which the damping is optimal. Maximum weight support per membrane: Membrane #1: 5 oz Membrane #3: 5 oz Membrane #5: 10 oz Membrane #7: 10 ozSpecifications Beiter V-Box Damper Starter EditionBeiter V-Box Basic kit incl. Membrane #1 #3 #5 and #7 3x 1oz V-Box Stainless Steel Weight8x V-Box Weight Spacer in various colors3x Baseplate 20mm, 23mm and 26mm1x 34mm weight screwChoice of 1/4" adapter (small), 2x 5/16" adapter (large) or an internal 1/4" adapter (small)

The Arctec Damper set can be used on the Arctec Crosstube stabalizers (short and long). Handmade in Solingen, Germany Specifications: – Material: aluminum, rubber

The heavy stainless steel version of the beiter V-Box. The stainless steel construction makes the damper stiffer and allows heavier weights. The Beiter V-Box is an adjustable damper for your bow or stabilization. The basic kit includes four different membranes to adjust the stiffness. This way you can fine-tune the damper to your shooting style and amount of weight. Each membrane has a maximum weight at which the damping is optimal.Maximum weight support per membrane:Membrane #1: 6 ozMembrane #3: 10 ozMembrane #5: 16 ozMembrane #7: 25 oz Specifications Beiter V-Box Damper Steel Basic KitMaterial: Stainless steel and rubberThread: 5/16"-24 UNFMembranes: #1, #3, #5 and #7

The colored version of the Beiter V-Box Basic Kit. The two mounting plates are made of anodized aluminum. An adjustable damper for your bow or stabilization. The basic kit includes four different membranes to adjust the stiffness. This way you can fine-tune the damper to your shooting style and amount of weight.Each membrane has a maximum weight at which the damping is optimal.Maximum weight support per membrane:Membrane #1: 5 oz Membrane #3: 5 oz Membrane #5: 10 oz Membrane #7: 10 ozBeiter V-Box Damper Basic Kit ColorMaterial: Plastic with Rubber MembraneThread: 5/16"-24 UNFDiaphragms: #1, #3, #5 and #7Colors: Red, Blue, Orange, Green and Purple

Mounting blocks to upgrade your current V-Box damper to a colored aluminum version. You get two blocks per set. So that is the top and bottom for a single damper. This kit is without membranes.Features Beiter V-Box Damper Color Upgrade KitMaterial: Anodized Aluminum Thread: internal 5/16" UNF

An upgrade kit to replace your plastic mounting blocks with stainless steel blocks. This makes the entire damper stronger and heavier. This kit comes without membranes.See here for more info about the upgrade. Specifications Beiter V-Box Damper Steel Upgrade KitMaterial: Stainless steelThread: 5/16"-24 UNF internal

Features Sanlida X10 Compound Damper:High-precision tech Weight: 284g Dampens the sound of the shot

Features Sanlida X10 Stabilizer Damper:Dampens shot vibrations1/4 inch thread

Features Focus Performance Damper: High quality rubber Easy to install Weather-resistant Compatible with different stabilizers Reduces vibrations

The same damper that comes standard with the Sebastien Flute Carbon Pro Stabilizers.This damper has 1/4 inch thread on both sides.