EVERYTHING FOR STARTING AND EXPERIENCED ARCHERS!
Product number:
151390.17
Beiter .166 Asymmetric Insert Nocks
| Quantity | Unit price |
|---|---|
| To 11 |
€1.20
|
| To 24 |
€1.13
|
| From 25 |
€1.02
|
Prices include VAT and exclude shipping costs
Product information "Beiter .166 Asymmetric Insert Nocks"
High-quality nock from Beiter with a diameter of .166.
This nock is asymmetrical, an asymmetrical nock is a nock that is not equal at the top and bottom. These nocks are mainly used by Recurve and Barebow archers, because they do not pull the string symmetrically. With an asymmetrical nock you ensure that the arrow leaves the string on the right side and this improves the arrow flight.
These nocks are suitable for all Easton shafts that can accommodate a G-Nock, below are some examples:
This nock is asymmetrical, an asymmetrical nock is a nock that is not equal at the top and bottom. These nocks are mainly used by Recurve and Barebow archers, because they do not pull the string symmetrically. With an asymmetrical nock you ensure that the arrow leaves the string on the right side and this improves the arrow flight.
These nocks are suitable for all Easton shafts that can accommodate a G-Nock, below are some examples:
- Easton XX75 Platinum Plus 1416 to 1916
- Easton XX75 Jazz 1214 to 1916
- Easton X7 Eclipse 1514 to 1914
- Easton Vector
- Easton Carbon One
- Easton Avance
- Easton A/C/E
- Easton Procomp
- If the shaft diameter is a few hundreds of millimeter too big and the nock fits too loose, don't glue it! Compensate the gap with a small strip of teflon tape.
Features Beiter .166 Asymmetric Insert Nocks
- Weight: 5.54 grains (0.36 grams)
- Nock fit: Size 1 (Small Groove) or 2 (Large Groove)
- Material: Plastic
- Installation: Make sure that the Beiter logo is always visible at the top.
| Nock fit: | Nockfit 1 (Small Groove), Nockfit 2 (Large Groove) |
|---|---|
| Suitable for: | Aluminium, Carbon |
| Symmetry: | Asymmetrical |
| Type: | Push-in nock |
Product information "Beiter .166 Asymmetric Insert Nocks"
High-quality nock from Beiter with a diameter of .166.
This nock is asymmetrical, an asymmetrical nock is a nock that is not equal at the top and bottom. These nocks are mainly used by Recurve and Barebow archers, because they do not pull the string symmetrically. With an asymmetrical nock you ensure that the arrow leaves the string on the right side and this improves the arrow flight.
These nocks are suitable for all Easton shafts that can accommodate a G-Nock, below are some examples:
This nock is asymmetrical, an asymmetrical nock is a nock that is not equal at the top and bottom. These nocks are mainly used by Recurve and Barebow archers, because they do not pull the string symmetrically. With an asymmetrical nock you ensure that the arrow leaves the string on the right side and this improves the arrow flight.
These nocks are suitable for all Easton shafts that can accommodate a G-Nock, below are some examples:
- Easton XX75 Platinum Plus 1416 to 1916
- Easton XX75 Jazz 1214 to 1916
- Easton X7 Eclipse 1514 to 1914
- Easton Vector
- Easton Carbon One
- Easton Avance
- Easton A/C/E
- Easton Procomp
- If the shaft diameter is a few hundreds of millimeter too big and the nock fits too loose, don't glue it! Compensate the gap with a small strip of teflon tape.
Features Beiter .166 Asymmetric Insert Nocks
- Weight: 5.54 grains (0.36 grams)
- Nock fit: Size 1 (Small Groove) or 2 (Large Groove)
- Material: Plastic
- Installation: Make sure that the Beiter logo is always visible at the top.
| Nock fit: | Nockfit 1 (Small Groove), Nockfit 2 (Large Groove) |
|---|---|
| Suitable for: | Aluminium, Carbon |
| Symmetry: | Asymmetrical |
| Type: | Push-in nock |