Cedar shafts of the highest quality, Port Orford cedar has always the preference of many traditional top archers. There is no wooden shaft that can measure up to the qualities of Port Orford cedar. They are strong, elastic and have the perfect weight/spine ratio.
Features
Sizes: 5/16 or 11/32
Length: 30 inch
Natural productBecause wood is a natural product, the wooden shafts differ from each other, in inner and outer characteristics mostly but but barely in diameter. For example, not all shafts are equally as straight, or stiff or heavy. The spine size is also not always the same, because of this wooden shafts are classified and sorted into categories with a margin of 5 lbs. To produce as many equal shafts all shafts are spined, checked on tears and breaks and aligned by hand.
Tailor-madeWe deliver shafts in full length, 30 inch. For many people this is to long and the shaft will have to be shortened. For a small fee of €0,10 per shaft we will shorten your shafts to you desired length. We use a special sawing machine where we can be accurate to the millimeter.
For even better shooting results, we can sort the shafts by weight within a margin of one gram. We do this in groups of maximum 12 shafts. If you want more, we will divide it into groups whose weights are as close as possible to each other.
The TopHat Classic points have a innovative design, you don’t need glue to install this point, you don’t even have to sharpen/taper the shaft. Installing this point is simple, just screw the shaft until you hit the end of the thread. The point is now anchored. We recommend using the TopHat Roughing tab to make installing your points even easier.
Features
Material: Nickel-plated SteelSize: 5/16 (70 and 100 grain) and 11/32 (80, 100 and 125 grain)
The classic bullet point is a very popular point. It is very common with Fita shooters, the shape makes it a target friendly point and easy to remove from the target.
The TopHat Classic points have a innovative design, you don’t need glue to install this point, you don’t even have to sharpen/taper the shaft. Installing this point is simple, just screw the shaft until you hit the end of the thread. The point is now anchored. We recommend using the TopHat Roughing tab to make installing your points even easier.
Features
Material: Burnished SteelType: Parallel screw on pointDiameter: 5/16 and 11/32Weight 5/16: 70, 100 grainWeight 11/32: 100, 125 grain
The classic bullet point is a very popular point. It is very common with Fita shooters, the shape makes it a target friendly point and easy to remove from the target.
The TopHat Classic points have a innovative design, you don’t need glue to install this point, you don’t even have to sharpen/taper the shaft. Installing this point is simple, just screw the shaft until you hit the end of the thread. The point is now anchored. We recommend using the TopHat Roughing tab to make installing your points even easier.
Features
Material: BrassType: Parallel screw on pointDiameter: 5/16 and 11/32Weight 5/16: 70, 100, 125 grainWeight 11/32: 80, 100, 125 grain
The classic bullet point is a very popular point. It is very common with Fita shooters, the shape makes it a target friendly point and easy to remove from the target.
The TopHat Classic points have a innovative design, you don’t need glue to install this point, you don’t even have to sharpen/taper the shaft. Installing this point is simple, just screw the shaft until you hit the end of the thread. The point is now anchored. We recommend using the TopHat Roughing tab to make installing your points even easier.
Features
Material: Steel-NikkelType: Parallel screw on pointDiameter: 5/16 and 11/32Weight 5/16: 70, 100 grainWeight 11/32: 80, 100, 125 grain
A parallel screw-on point from Tophat with extra length. Ideal when your arrow breaks off just behind the point, or when you want arrows that are just as long as the maximum length of 32 inches.Diameter: 5/15Weight : 100 grains
The Kinetic Arios is a beautiful riser for the starting recurve archer. With its sleek looks, and yet affordable pricing, you have a professional looking riser with all the bushings for accessories that you need. The Kinetic Arios also features adjustable tiller bolts and a limb alignment system so you can align the limbs perfectly for the most accurate shots.
Specs Kinetic Arios
Lenght: 25 inchMaterial: 6063-T6 aluminium alloyColours: Black, blue, orange, red, turquoise, smoke and tacticalFitting: ILFFinish: AnodizedWeight: 1080 grams
Fast Flight strings are ideal for recurve sportsbows. In contrast to Dacron, Fast Flight strings have little to no deformation. This gives more speed to the arrow. Less suited for wooden bows.
Explanation strings lengths:- 70 inch: Bowlength in inches- 169: Stringlength in Centimeters- RC: Standard recurve size
Fast Flight strings are ideal for recurve sportsbows. In contrast to Dacron, Fast Flight strings have little to no deformation. This gives more speed to the arrow. Less suited for wooden bows.
Explanation strings lengths:- 70 inch: Bowlength in inches- 169: Stringlength in Centimeters- RC: Standard recurve size
Budget Clicker by Cartel. This clicker is in the longer version for the recurve bows. The clicker ensures that you always knows how far your bow is spanned. As soon as your arrow has been drawn, the clicker jumps back on the riser. This gives the archer the signal that the bow is completely spanned. This way you always shoot with the same power.
Installed with double-sided adhesive tape.
This shooting glove is made of airy mesh, which is particularly pleasant in the summer
Specifications:
Material: Nylon
Color: White/black
Sizes: XS-S-M-L-XL-XXL
New elegant model of Aurora field quiver, made with a light weight fabric and honeycomb weaving. Sturdy but light, this perfectly reversible quiver will surely be appreciated. Equipped with a large accessory pocket and a flat upper pocket for the extractor or tab. Complete with strap to secure it to the leg. Specifications Aurora Fieldquiver Techno Next: Use: Ambidexter Left & Right Color: Black, Blue, Light Blue, Green, Orange, Red
The product of Neet Archery are of good quality and very nicely priced. This Fred Bear shooting glove is made of high quality leather and is provided with reinforced finger tips. Additionally, the glove is adjustable around the wrist, making sure it always fits perfectly.
Specifications Neet Fred Bear Shooting Glove FB-G1:
Material glove: Leather
Material fingertips: Cowhide leather
Color: Burgundy with dark brown tips
Available sizes: S, M, L, XL
The Oak Ridge Viridian is a 62 inch take-down recurve field bow made by Win&Win. The limbs are made of maple wood with black fiberglass for a nice traditional look. Combined with the 20 inch Oak Ridge Viridian handle you get a nice, well priced field bow. The limbs of the Viridian are reinforced, allowing you to shoot with a fast flight (or equivalent) string.
As an added advantage, both the handle and the limbs are the same fit as the popular Samick Sage. This means you can combine the riser of the one brand and the limbs of the other.
Specifications Oak Ridge Viridian:
Bow length with Viridian handle: 62inch
Material limbs: Maple and fiberglass
Tips: Reinforced
Advised String material: Fast Flight
Fitting: Screw-on
Possible to combine with Samick Sage
A nice pair of limbs for the beginning archer, made of laminated fiberglass and wood. These limbs are suited for use with an ILF riser.
Specifications Core Prelude Limbs:
Material: Fiber/wood
Fitting: ILF
Type of string: Fast Flight
Special order: 66/12 - 66/14 - 68/14
Explanation length recurve limbs:
The length designation of Olympic recurve limbs are generally based on a 25 inch riser. Most limbs however come in 3 sizes: Short, Medium and Long, which gives the following bow lengths:
Short: 66 inch bow
Medium: 68 inch bow
Long: 70 inch bow
Of course it is possible to use the limbs on shorter or longer risers. However, take into account that in addition to the length of your bow, this also has an effect on the draw length. As a rule of thumb: for every inch the riser is shorter than 25 inches, you must add 1 LBS to the draw weight. Also, for every inch the riser is longer than 25 inches, you must subtract 1 LBS from the draw weight. Please note, this information is purely and only intended as a rule of thumb; due to the variety in materials, combinations you can make and difference in shapes, the final results can still deviate.
Luxury quiver by Avalon with integrated divider to sort your arrows. Additionally, the divider ensures that the quiver stays in balance. Lastly, the quiver has extensive accessory pockets to make sure everything is stored safely.
Available for left- and right handed archers.
Features Avalon Tec-X Sidequiver:
Arrow pockets: 6
Accessory pockets: 2
Available colors: white, black, grey, red and blue
Belt included
These limbs by Kinetic have a cool matte black and fluor green look, and are high quality limbs in their price range.Specifications Kinetic Yntevo:
Fitting: ILF
Finish: Matte lacquer
Reinforced machined tips
Fast Flight compatible
Draw weight: 14-40 LBS (68" -42 LBS, 70" -44 LBS)
A simple but beautiful peepsight for compound bows. Because of its special design it is perfectly round and aligned on full draw. It weighs only 8,5 grain and is made of aluminium. It also has a groove to secure the peepsight on the string. Available in many sizes. The size is expressed in inches and corresponds with the inside of the opening.
Features Jim Fletcher Peep Sight Tru Peep:
Material: aluminium
Weight: 8.5 grain
Did your string break or do you prefer to have an extra one on hand? This spare string for the Man Kung CBA1 is the solution.
Be aware, to replace the string of a compound bow you will need a bowpress.
The Field quiver is so convenient it is more and more popular, also among those who shoot target archery. The way arrow stick out of it, pointing backward gives the archer more space for movement on the shooting line. This new Aurora model features a beautiful and elegant structure, with a selection of colors in a melange fabric. The quiver is complete of a belt in a matching color, thigh, a spare arrow separator and a removable 6 spaces rubber divider. There are also 2 pockets for small accessories: 1 on the main body and 1 on the upper part of the quiver where an open pocket for the arrow puller is also present.
A nice pair of limbs for the beginning archer, made of laminated fiberglass and wood. These limbs are suited for use with an ILF riser.
Specifications Core Prelude Limbs:
Material: Fiber/wood
Fitting: ILF
Type of string: Fast Flight
Special order: 66/12 - 66/14 - 68/14
Explanation length recurve limbs:
The length designation of Olympic recurve limbs are generally based on a 25 inch riser. Most limbs however come in 3 sizes: Short, Medium and Long, which gives the following bow lengths:
Short: 66 inch bow
Medium: 68 inch bow
Long: 70 inch bow
Of course it is possible to use the limbs on shorter or longer risers. However, take into account that in addition to the length of your bow, this also has an effect on the draw length. As a rule of thumb: for every inch the riser is shorter than 25 inches, you must add 1 LBS to the draw weight. Also, for every inch the riser is longer than 25 inches, you must subtract 1 LBS from the draw weight. Please note, this information is purely and only intended as a rule of thumb; due to the variety in materials, combinations you can make and difference in shapes, the final results can still deviate.
Set of limbs from Ragim, the ILF Red Lion. Made of hard maple and provided with a transparent fiberglass layer so that the wood structure comes out beautifully. Naturally, the tips are reinforced so that these limbs can handle Fast Flight strings. Features Ragim Red Lion ILF LimbsLength: LongDraw weight: 30 LbsMaterial: maple with fiberglassFitting: ILFConcerns a demo model with minor signs of wear.
Quality finger tab from SF Archery, now WNS (Winners). The frame of this Olympic finger tab is made of carbon, the leather of cordovan. Concerns an old model, new in the packaging.
The Honoric limbs by Kinetic are beautiful ILF limbs that are very good for the starting to advanced archer who is ready for a bit of extra speed and torsional stiffness. The combination of carbon and foam is an often used combination because of their lack of weight and consistent nature. Very good materials for limbs! Specifications Kinetic Honoric Limbs - White: Material: Carbon/Foam Fitting: ILF Type of string: Fast FlightExplanation length recurve limbs: The length designation of Olympic recurve limbs are generally based on a 25 inch riser. Most limbs however come in 3 sizes: Short, Medium and Long, which gives the following bow lengths: Short: 66 inch bow Medium: 68 inch bow Long: 70 inch bow Of course it is possible to use the limbs on shorter or longer risers. However, take into account that in addition to the length of your bow, this also has an effect on the draw length. As a rule of thumb: for every inch the riser is shorter than 25 inches, you must add 1 LBS to the draw weight. Also, for every inch the riser is longer than 25 inches, you must subtract 1 LBS from the draw weight. Please note, this information is purely and only intended as a rule of thumb; due to the variety in materials, combinations you can make and difference in shapes, the final results can still deviate.
This 2022 version of the Avalon Tec One Field Quiver is made of durable Cordura, a material that is exceptionally resistant to wear and tear. It comes with a belt and two rings for attaching accessories like an arrow counter or arrow extractor. A striking feature of this quiver are the integrated dividers in the quiver itself. These are made of sound-dampening material to make the quiver as quiet as possible.