The Honoric limbs by Kinetic are beautiful ILF limbs that are very good for the starting to advanced archer who is ready for a bit of extra speed and torsional stiffness. The combination of carbon and foam is an often used combination because of their lack of weight and consistent nature. Very good materials for limbs! Specifications Kinetic Honoric Limbs: Material: Carbon/Foam Fitting: ILF Type of string: Fast FlightExplanation length recurve limbs: The length designation of Olympic recurve limbs are generally based on a 25 inch riser. Most limbs however come in 3 sizes: Short, Medium and Long, which gives the following bow lengths: Short: 66 inch bow Medium: 68 inch bow Long: 70 inch bow Of course it is possible to use the limbs on shorter or longer risers. However, take into account that in addition to the length of your bow, this also has an effect on the draw length. As a rule of thumb: for every inch the riser is shorter than 25 inches, you must add 1 LBS to the draw weight. Also, for every inch the riser is longer than 25 inches, you must subtract 1 LBS from the draw weight. Please note, this information is purely and only intended as a rule of thumb; due to the variety in materials, combinations you can make and difference in shapes, the final results can still deviate.
Ready for a new set of limbs for your Core Take Down bow? These limbs are white with black/blue print and fit the risers by Core Archery.
The limbs are suited for the risers by Core Archery like:– Core Wooden Take Down recurve bow (also used in the Wooden Bow Sets)– Core Pro Metal– Core Jet Metal– Core Silouette
Specs Core Shift wooden limbs
Length: 62 – 70 inch (depends on riser length)
Drawweight: 16 – 38 lbs
(Note: 40 lbs only available in 62, 64 and 70 inch. If you want to order this size, please say so in the comments at the end of your order)
Features Core Prestige ILF Recurve Limbs:Fitting: ILFMaterial: Fiberglass with wooden coreReinforced tipsDraw weight: 14 to 40lbs (in 2lb increments)Available in short, medium and longLength on a 25 inch riser: Short: 66 inches - Medium: 68 inches - Long: 70 inches
Features Sanlida Miracle X7 Fiber Wood ILF Recurve Limbs:Material: Fiber Wood Fitting: ILF Tips: ReinforcedLength on a 25 inch riser: Short: 66 inch - Medium: 68 inch - Long: 70 inch Draw weight on 25": 14 to 46 LBS (in 2 LBS increments)
The Core Tegra limbs have a nice black colour and give your bow a traditional look.
The limbs are suited for the risers by Core Archery like:– Core Take Down recurve bow (also used in the Wooden Bow Sets)– Core Pro Metal– Core Jet Metal– Core Silouette
Specs Core Tegra limbs:
Length: 62 – 70 inch (depends on riser length)
Drawweight: 16 – 38 Lbs
(Note: 40 lbs only available in 62, 64 and 70 inch. If you want to order this size, please say so in the comments at the and of your order)
Budget-friendly cross carbon limbs from Core. With front and rear cross carbon for high torsional stiffness. With a maple core. From 38 pounds this core is doubled.Specifications (LIMBS) ILF Limbs:
Material: Maple and Cross-Carbon
Fitting: ILFString: Fast Flight
Draw weight: 20 - 42 lbs
Lenght: Short (66 inch) – Medium (68 inch) – Long (70 inch)
Guidelines Riser and Limbs combination
The draw weight of Olympic recurve limbs is always measured on a 25 inch riser. It is generally possible to use limbs on a smaller riser, but consider that there will be a change of draw weight, a general rule of thumb is that for every inch difference the draw weight will change 1 LBS, for example:
Medium (68 inch) limbs with a draw weight of 30 LBS with a:
1) 25 inch riser makes a 68 inch bow with a draw weight of 30 LBS
2) 23 inch riser makes a 66 inch bow with a draw weight of 32 LBS
3) 21 inch riser makes a 64 inch bow with a draw weight of 34 LBS
Also consider that draw weight of ILF limbs are generally measured at a draw lenght of 28 inch, as a rule of thumb you need to add 2 LBS of draw weight for every inch you draw more then 28 inch and vice versa. All this instructions are to be considered as GUIDELINES as the different form and construction of a limb and/or riser can give higher ore lesser results, nonetheless it is a good base to start from.
These nice looking Winners (WNS) Delta F2 limbs use the ILF system. This means you can use them with nearly all modern recurve risers. Because of the combination of wood and foam in the core, these limbs are relatively smooth and quite fast considering their price point. Since the limbs have reinforces tips you have the possibility to shoot a fast flight (or similar) material string.
Specifications Winners (WNS) Delta F2 Recurve Limbs:
Material: Foam/Wood
Fitting: ILF
String: Fast Flight
Length: Short 66″ – Medium 68″ – Long 70″
Drawweight: 16 to 40 LBS (in steps of 2 LBS)
Explanation Length Recurve Limbs
The length of recurve limbs are typically based on the use of a 25 inch riser. Most limbs come in three sizes: Short, Medium and Long. This will get you the following lengths:
Short: 66 inch bowMedium: 68 inch bowLong: 70 inch bow
The Fury is a stable, lightweight and fast limb from the Kinetic brand. This limb has a wide base that extends to a thin tip. This shifts the mass of the limb away from the part that moves the most, resulting in rapid arrow flight.
Specifications Kinetic Fury ILF Recurve Limbs:
Material: 3K Carbon/Foam
Fitting: ILFString: Fast Flight
Lengths: Short 66″ – Medium 68″ – Long 70″
Draw weights: 24 to 44 LBS (in 2 LBS increments)
Guidelines Riser and Limbs combination
The draw weight of Olympic recurve limbs is always measured on a 25 inch riser. It is generally possible to use limbs on a smaller riser, but consider that there will be a change of draw weight, a general rule of thumb is that for every inch difference the draw weight will change 1 LBS, for example:
Medium (68 inch) limbs with a draw weight of 30 LBS with a:
1) 25 inch riser makes a 68 inch bow with a draw weight of 30 LBS
2) 23 inch riser makes a 66 inch bow with a draw weight of 32 LBS
3) 21 inch riser makes a 64 inch bow with a draw weight of 34 LBS
Also consider that draw weight of ILF limbs are generally measured at a draw lenght of 28 inch, as a rule of thumb you need to add 2 LBS of draw weight for every inch you draw more then 28 inch and vice versa. All this instructions are to be considered as GUIDELINES as the different form and construction of a limb and/or riser can give higher ore lesser results, nonetheless it is a good base to start from.
The Armato C3 slats are the entry-level to mid-range limbs from Winners (WNS). Available in two versions. The Foam and the Wood core.
This is the Foam core.Compared to the Wood core version, the Foam core version is more weather resistant. This means there will be less variation in shooting in different weather conditions such as temperature or humidity.Specifications Winners(WNS SF-Line)Armato C3 Carbon Foam:
Material: Foam/carbon
Fitting: ILF
Draw weight: 18 – 42 LBS (Depends on length, in steps of 2lbs)
Lenght: Short (66 inch) – Medium (68 inch) – Long (70 inch)
Guidelines Riser and Limbs combination
The draw weight of Olympic recurve limbs is always measured on a 25 inch riser. It is generally possible to use limbs on a smaller riser, but consider that there will be a change of draw weight, a general rule of thumb is that for every inch difference the draw weight will change 1 LBS, for example:
Medium (68 inch) limbs with a draw weight of 30 LBS with a:
1) 25 inch riser makes a 68 inch bow with a draw weight of 30 LBS
2) 23 inch riser makes a 66 inch bow with a draw weight of 32 LBS
3) 21 inch riser makes a 64 inch bow with a draw weight of 34 LBS
Also consider that draw weight of ILF limbs are generally measured at a draw lenght of 28 inch, as a rule of thumb you need to add 2 LBS of draw weight for every inch you draw more then 28 inch and vice versa. All this instructions are to be considered as GUIDELINES as the different form and construction of a limb and/or riser can give higher ore lesser results, nonetheless it is a good base to start from.
ILF recurve entry level limbs by the brand WNS. The limbs contain a combination of 2 layers of wood and fiber this combination makes these limbs flexible and comfortable to shoot and gives them a lot of accuracy even with a lower poundage. A perfect set of limbs to start with as a recurve archer.
Specs Winners (WNS) Explore W1
Material: Wood/fiber
Fitting: ILF
Lenght: Short (66 inch) – Medium (68 inch) – Long (70 inch)
Drawweight: 16 – 40 LBS
Guidelines Riser and Limbs combination
The draw weight of Olympic recurve limbs is always measured on a 25 inch riser. It is generally possible to use limbs on a smaller riser, but consider that there will be a change of draw weight, a general rule of thumb is that for every inch difference the draw weight will change 1 LBS, for example:
Medium (68 inch) limbs with a draw weight of 30 LBS with a:
1) 25 inch riser makes a 68 inch bow with a draw weight of 30 LBS
2) 23 inch riser makes a 66 inch bow with a draw weight of 32 LBS
3) 21 inch riser makes a 64 inch bow with a draw weight of 34 LBS
Also consider that draw weight of ILF limbs are generally measured at a draw lenght of 28 inch, as a rule of thumb you need to add 2 LBS of draw weight for every inch you draw more then 28 inch and vice versa. All this instructions are to be considered as GUIDELINES as the different form and construction of a limb and/or riser can give higher ore lesser results, nonetheless it is a good base to start from.
A nice pair of limbs for the beginning archer, made of laminated fiberglass and wood. These limbs are suited for use with an ILF riser.
Specifications Core Prelude Limbs:
Material: Fiber/wood
Fitting: ILF
Type of string: Fast Flight
Special order: 66/12 - 66/14 - 68/14
Explanation length recurve limbs:
The length designation of Olympic recurve limbs are generally based on a 25 inch riser. Most limbs however come in 3 sizes: Short, Medium and Long, which gives the following bow lengths:
Short: 66 inch bow
Medium: 68 inch bow
Long: 70 inch bow
Of course it is possible to use the limbs on shorter or longer risers. However, take into account that in addition to the length of your bow, this also has an effect on the draw length. As a rule of thumb: for every inch the riser is shorter than 25 inches, you must add 1 LBS to the draw weight. Also, for every inch the riser is longer than 25 inches, you must subtract 1 LBS from the draw weight. Please note, this information is purely and only intended as a rule of thumb; due to the variety in materials, combinations you can make and difference in shapes, the final results can still deviate.
WNS Motive F5 limbs are high performance limbs for the beginning and intermediate archer looking for an affordable fiber/foam limb. The limbs are made of a combination of high quality foam and fiberglass. They are build for a fast and stable performance. These limbs are designed in way that should make them torque resistant.
Specifications WNS Motive F5 Limbs:
Material: Wood/Fiber
Fitting: ILF
Lenght: Short (66 inch) – Medium (68 inch) – Long (70 inch)
Drawweight: 16 – 46 LBS (with increments of 2 lbs)
Guidelines Riser and Limbs combination
The draw weight of Olympic recurve limbs is always measured on a 25 inch riser. It is generally possible to use limbs on a smaller riser, but consider that there will be a change of draw weight, a general rule of thumb is that for every inch difference the draw weight will change 1 LBS, for example:
Medium (68 inch) limbs with a draw weight of 30 LBS with a:
1) 25 inch riser makes a 68 inch bow with a draw weight of 30 LBS
2) 23 inch riser makes a 66 inch bow with a draw weight of 32 LBS
3) 21 inch riser makes a 64 inch bow with a draw weight of 34 LBS
Also consider that draw weight of ILF limbs are generally measured at a draw lenght of 28 inch, as a rule of thumb you need to add 2 LBS of draw weight for every inch you draw more then 28 inch and vice versa. All this instructions are to be considered as GUIDELINES as the different form and construction of a limb and/or riser can give higher ore lesser results, nonetheless it is a good base to start from.
Lots of quality for a good price. With these limbs, Kinetic made a nice product for the beginning and intermediate archer. The limbs are made up from wood and fibre glass. The limbs are based on usage of a 25 inch riser. They will fit in other sizes too but then the length of the bow changes with it.
Specifications Kinetic Limbs Engage:
Material: Fiber/wood
Fitting: ILF
String type: Fast Flight
The Trinity C6 limbs from Winners SF-Line are flexible and comfortable to shoot due to the use of nano-carbon and high-foam core technology. Matt finished with blue accents.This limb has a greater recurve curvature than most limbs.Specifications Winners(WNS SF-Line) Trinity C6 ILF LimbsMaterial: Carbon/FoamFitting: ILFString: Fast FlightPoundage: 22 to 46 pounds in 2-pound increments Length: Short, Medium, Long (66, 68, and 70 inches on a 25 inch handle)
Features Kinetic Invelta Bamboo ILF Recurve Limbs: Fiting: ILFMaterial: Fiberglass with bamboo core Draw weight: 18 till 40lbs (with 2lbs increments)Available in short, medium and long Reinforced tipsDraw weight is calculated at a drawlength of 26 inch with a tolerance of 1lbsLength on a 25inch riser: Short: 66 inch - Medium: 68 inch - Long: 70 inch
Features Shocq Grant Screw-on Limbs: Material: FRP/Wood Fitting: Screw-on Length: 54/58/66/68/70 Inch Draw Weight: 12 to 30 LBS (in increments of 2 LBS) Draw weight is based on a 28 Inch draw length
A carbon foam limb from Kinetic. Composed of 3K woven carbon outer layers, unidirectional carbon inner layers and two foam layers. Designed with a slim tip for a more efficient power transfer. The characteristic of the bat is smooth and fast.Features Kinetic Palmaris V2 ILF Recurve Limbs: Material: 3K Nano-Carbon with Foam core Fitting: ILF Length: Short (66“) / Medium (68”) / Long (70") Draw Weight: 20 to 44 LBS (in 2LBS increments)
These limbs by Kinetic have a cool matte black and fluor green look, and are high quality limbs in their price range.Specifications Kinetic Yntevo:
Fitting: ILF
Finish: Matte lacquer
Reinforced machined tips
Fast Flight compatible
Draw weight: 14-40 LBS (68" -42 LBS, 70" -44 LBS)
the Kinetic Vaultage limbs are built up using layers of Nano-carbon and foam, ensuring extreme amounts of stability, less vibration and a smoother draw curve. The design of these limbs will result in better energy storage and therefore higher arrow speeds. The limb tips are quite narrow and keep the mass weight down. These limbs are reinforced at the points of contact with the riser.
Specifications Kinetic Vaultage Carbon Foam:
Materials: Foam and 3K Nano-Carbon
Fitting: ILF
String: Fast Flight or similar
Lengths: Short 66″ – Medium 68″ – Long 70″
Draw weights: 20 to 44 lbs (in 2 lbs increments)
Explanation Length Recurve Limbs
The length of recurve limbs are typically based on the use of a 25 inch riser. Most limbs come in three sizes: Short, Medium and Long. This will get you the following lengths:
Short: 66 inch bowMedium: 68 inch bowLong: 70 inch bow
Of course you can also use these limbs on different lengths of risers, however, you will have to take into account that besides changing the total length of the bow, you will also change the draw weight. As a rule of thumb, you can add roughly 1 pound per decreasing inch and subtract roughly 1 pound per inch you add to your set-up. Please be mindful of the fact that this is purely meant as a rule of thumb and not the absolute truth. There may be differences due to the vast selection of materials, shapes and combinations.
The WNS Motive C5 Carbon/Foam limbs are made for the advanced archer. The limbs are made of a combination of crossed carbon and foam, making the limb both fast and smooth.
These limbs are designed so they won’t be influenced by the weather.
Specs Winners (WNS) Motive C5:
Material: Carbon/Foam
Fitting: ILF
Lenght: Short (66 inch) – Medium (68 inch) – Long (70 inch)
Drawweight: 24 – 40 LBS
Guidelines Riser and Limbs combination
The draw weight of Olympic recurve limbs is always measured on a 25 inch riser. It is generally possible to use limbs on a smaller riser, but consider that there will be a change of draw weight, a general rule of thumb is that for every inch difference the draw weight will change 1 LBS, for example:
Medium (68 inch) limbs with a draw weight of 30 LBS with a:
1) 25 inch riser makes a 68 inch bow with a draw weight of 30 LBS
2) 23 inch riser makes a 66 inch bow with a draw weight of 32 LBS
3) 21 inch riser makes a 64 inch bow with a draw weight of 34 LBS
Also consider that draw weight of ILF limbs are generally measured at a draw lenght of 28 inch, as a rule of thumb you need to add 2 LBS of draw weight for every inch you draw more then 28 inch and vice versa. All this instructions are to be considered as GUIDELINES as the different form and construction of a limb and/or riser can give higher ore lesser results, nonetheless it is a good base to start from.
These luxurious limbs by Kinetic are built up out of carbon and bamboo, for a fast and smooth limb. The narrow design helps the arrow speed, as well as the redesigned lighter and stronger limb tip. This does not only bode well for shootability, it also means you can shoot fast flight equivalent string materials.Specifications Kinetic Finity:
Material: Bamboo, Cross carbon
Fast Flight Compatible
Fitting: ILF
Draw weight: 20-44 LBS in 2 LBS increments
The Hyperion G8 limbs are mid to high tier limbs from WNS (SF-Line). Composed of multiple layers of cross-carbon and foam. made with a slightly larger recurve curvature than most limbs.
The gold print and matte finish provide a sleek look.Specifications Winners(WNS SF-Line)Hyperion G8 ILF LimbsMaterial: Carbon/FoamFitting: ILFType of string: Fast FlightPoundage: 24 to 48 pounds in 2-pound increments Length: Short, Medium, Long (66, 68, and 70 inches on a 25 inch handle)
Explanation length recurve limbs:The length designation of Olympic recurve limbs are generally based on a 25 inch riser. Most limbs however come in 3 sizes: Short, Medium and Long, which gives the following bow lengths:Short: 66 inch bowMedium: 68 inch bowLong: 70 inch bowOf course it is possible to use the limbs on shorter or longer risers. However, take into account that in addition to the length of your bow, this also has an effect on the draw length. As a rule of thumb: for every inch the riser is shorter than 25 inches, you must add 1 LBS to the draw weight. Also, for every inch the riser is longer than 25 inches, you must subtract 1 LBS from the draw weight.Please note, this information is purely and only intended as a rule of thumb; due to the variety in materials, combinations you can make and difference in shapes, the final results can still deviate.
ILF Limbs from Sebastien Flute. Made to compete with the middle class due to the Cross-carbon and foam construction. The cross-carbon affects the arrow speed when shooting.Specifications Sebastien Flute Ignio ILF Limbs
Material: Cross-Carbon, Foam and FiberglassLengths: 66", 68" and 70"Draw Weight: 26# to 40#
Features Kinetic New Avantage Fiber Foam ILF Recurve Limbs:Material: Fiber FoamFitting: ILFLength on a 25 inch riser: Short: 66 inch - Medium: 68 inch - Long: 70 inchDraw Weight on 25": 18 to 40 LBS (in 2LBS increments)
The Hoyt RCRV Comp Limbs are ideal for serious beginning and advanced archers. Hoyt focuses mainly on this group of shooters with the RCRV line and offers truly top quality for a good price.
Features Hoyt RCRV Comp Grand Prix Limbs
Material: 4 Layer laminate construction of fiberglass and rock maple wood
Fitting: ILF
Draw weight: 20 - 36 LBS (in 2 LBS increments)
Length: Short, Medium or Long
Recommended string material: Fast Flight or similar
Explanation length recurve limbs:
The length designation of Olympic recurve limbs are generally based on a 25 inch riser. Most limbs however come in 3 sizes: Short, Medium and Long, which gives the following bow lengths:
Short: 66 inch bow
Medium: 68 inch bow
Long: 70 inch bow
Of course it is possible to use the limbs on shorter or longer risers. However, take into account that in addition to the length of your bow, this also has an effect on the draw length. As a rule of thumb: for every inch the riser is shorter than 25 inches, you must add 1 LBS to the draw weight. Also, for every inch the riser is longer than 25 inches, you must subtract 1 LBS from the draw weight. Please note, this information is purely and only intended as a rule of thumb; due to the variety in materials, combinations you can make and difference in shapes, the final results can still deviate.
3K cross carbon recurve Limbs from Shocq. These Limbs are constructed with a foam core and 3K carbon outer layer. Flexibility and torsional stiffness guaranteed!
Properties Shocq Triumph 3K Cross Carbon ILF Recurve Limbs
Material: 3K Carbon and Foam
Fitting: ILF
Length: 66/69/70 Inch
Draw weight: 14 to 38 LBS (in steps of 2 LBS)
The Draw weight is based on a 25 Inch Handle
WNS Delta F3 limbs are limbs for the beginning and intermediate archer looking for an affordable limb. The limbs are made of a combination of high quality wood and fiberglass. They are build for a fast and stable performance. These limbs are designed in way that should make them torque resistant.
Specs Winners (WNS) Delta F3 Limbs:
Material: Wood/Fiber
Fitting: ILF
Lenght: Short (66 inch) – Medium (68 inch) – Long (70 inch)
Drawweight: 16 – 44 LBS (depending on length and with increments of 2 lbs)
Guidelines Riser and Limbs combination
The draw weight of Olympic recurve limbs is always measured on a 25 inch riser. It is generally possible to use limbs on a smaller riser, but consider that there will be a change of draw weight, a general rule of thumb is that for every inch difference the draw weight will change 1 LBS, for example:
Medium (68 inch) limbs with a draw weight of 30 LBS with a:
1) 25 inch riser makes a 68 inch bow with a draw weight of 30 LBS
2) 23 inch riser makes a 66 inch bow with a draw weight of 32 LBS
3) 21 inch riser makes a 64 inch bow with a draw weight of 34 LBS
Also consider that draw weight of ILF limbs are generally measured at a draw lenght of 28 inch, as a rule of thumb you need to add 2 LBS of draw weight for every inch you draw more then 28 inch and vice versa. All this instructions are to be considered as GUIDELINES as the different form and construction of a limb and/or riser can give higher ore lesser results, nonetheless it is a good base to start from.
A nice pair of limbs for the beginning archer, made of laminated fiberglass and wood. These limbs are suited for use with an ILF riser.
Specifications Core Prelude Limbs:
Material: Fiber/wood
Fitting: ILF
Type of string: Fast Flight
Special order: 66/12 - 66/14 - 68/14
Explanation length recurve limbs:
The length designation of Olympic recurve limbs are generally based on a 25 inch riser. Most limbs however come in 3 sizes: Short, Medium and Long, which gives the following bow lengths:
Short: 66 inch bow
Medium: 68 inch bow
Long: 70 inch bow
Of course it is possible to use the limbs on shorter or longer risers. However, take into account that in addition to the length of your bow, this also has an effect on the draw length. As a rule of thumb: for every inch the riser is shorter than 25 inches, you must add 1 LBS to the draw weight. Also, for every inch the riser is longer than 25 inches, you must subtract 1 LBS from the draw weight. Please note, this information is purely and only intended as a rule of thumb; due to the variety in materials, combinations you can make and difference in shapes, the final results can still deviate.
the Kinetic Palmaris limbs are built up using layers of Nano-carbon and foam, ensuring extreme amounts of stability, less vibration and a smoother draw curve. The design of these limbs will result in better energy storage and therefore higher arrow speeds. The integrated limb tips made it possible to leave them quite narrow and keep the mass weight down. These limbs are reinforced at the points of contact with the riser.
Specifications Kinetic Palmaris Carbon Foam:
Materials: Foam and 3K Nano-Carbon
Fitting: ILF
String: Fast Flight or similar
Lengths: Short 66" - Medium 68" - Long 70"
Draw weights: 20 to 44 lbs (in 2 lbs increments)
Explanation Length Recurve Limbs
The length of recurve limbs are typically based on the use of a 25 inch riser. Most limbs come in three sizes: Short, Medium and Long. This will get you the following lengths:
Short: 66 inch bow
Medium: 68 inch bow
Long: 70 inch bow
Of course you can also use these limbs on different lengths of risers, however, you will have to take into account that besides changing the total length of the bow, you will also change the draw weight. As a rule of thumb, you can add roughly 1 pound per decreasing inch and subtract roughly 1 pound per inch you add to your set-up. Please be mindful of the fact that this is purely meant as a rule of thumb and not the absolute truth. There may be differences due to the vast selection of materials, shapes and combinations.
The Armato C3 limbs are the entry-level to mid-range limbs from Winners (WNS). Available in two versions. The Foam and the Wood core.
This is the Foam core.Compared to the Foam core version, the wood core version is more lively. This means the bow gives more feedback in the shotSpecifications Winners(WNS)Armato C3 Carbon Wood:
Material: Wood/carbon
Fitting: ILF
Draw weight: 18 – 42 LBS (Depends on length, in steps of 2lbs)
Lenght: Short (66 inch) – Medium (68 inch) – Long (70 inch)
Guidelines Riser and Limbs combination
The draw weight of Olympic recurve limbs is always measured on a 25 inch riser. It is generally possible to use limbs on a smaller riser, but consider that there will be a change of draw weight, a general rule of thumb is that for every inch difference the draw weight will change 1 LBS, for example:
Medium (68 inch) limbs with a draw weight of 30 LBS with a:
1) 25 inch riser makes a 68 inch bow with a draw weight of 30 LBS
2) 23 inch riser makes a 66 inch bow with a draw weight of 32 LBS
3) 21 inch riser makes a 64 inch bow with a draw weight of 34 LBS
Also consider that draw weight of ILF limbs are generally measured at a draw lenght of 28 inch, as a rule of thumb you need to add 2 LBS of draw weight for every inch you draw more then 28 inch and vice versa. All this instructions are to be considered as GUIDELINES as the different form and construction of a limb and/or riser can give higher ore lesser results, nonetheless it is a good base to start from.
The Procyon C5 are the mid-range limbs from Winners (WNS). Available in two versions. The Foam and the Wood core.
This is the Foam core.Compared to the Wood core version, the Foam core version is more weather resistant. This means there will be less variation in shooting in different weather conditions such as temperature or humidity.Specifications Winners(WNS)Procyon C5 Carbon Foam:
Material: Foam/carbon
Fitting: ILF
Draw weight: 20 – 44 LBS (Depends on length, in steps of 2lbs)
Lenght: Short (66 inch) – Medium (68 inch) – Long (70 inch)
Guidelines Riser and Limbs combination
The draw weight of Olympic recurve limbs is always measured on a 25 inch riser. It is generally possible to use limbs on a smaller riser, but consider that there will be a change of draw weight, a general rule of thumb is that for every inch difference the draw weight will change 1 LBS, for example:
Medium (68 inch) limbs with a draw weight of 30 LBS with a:
1) 25 inch riser makes a 68 inch bow with a draw weight of 30 LBS
2) 23 inch riser makes a 66 inch bow with a draw weight of 32 LBS
3) 21 inch riser makes a 64 inch bow with a draw weight of 34 LBS
Also consider that draw weight of ILF limbs are generally measured at a draw lenght of 28 inch, as a rule of thumb you need to add 2 LBS of draw weight for every inch you draw more then 28 inch and vice versa. All this instructions are to be considered as GUIDELINES as the different form and construction of a limb and/or riser can give higher ore lesser results, nonetheless it is a good base to start from.
The Newtron limbs are strong and fast limbs from Sebastien Flute. Made of High Quality Carbon and Foam. Made for a smooth draw cycle and a strong shot.Specifcations Sebastien Flute Newtron Carbon Foam ILF LimbsMaterial: High Quality Carbon and Foam Lengths: 66"(Short), 68"(Medium) and 70"(Long)Draw weight: 26# to 40#
![[SALE] Core Prelude Black ILF limbs](https://www.dutchbowstore.com/media/a1/30/0e/1648811334/corepreludeblackilflimbs.jpg?ts=1648811334 "[SALE] Core Prelude Black ILF limbs")
![[SALE] Kinetic Yntevo ILF Recurve Limbs](https://www.dutchbowstore.com/media/0f/62/e7/1663595528/kinetic-yntevo-ilf-limbs.jpg?ts=1663595528 "[SALE] Kinetic Yntevo ILF Recurve Limbs")
![[SALE] Core Prelude White ILF limbs](https://www.dutchbowstore.com/media/e3/f8/d0/1648811335/corepreludewhiteilflimb.jpg?ts=1648811380 "[SALE] Core Prelude White ILF limbs")
