Beiter

An asymmetrical nock is a nock that is differently shaped on the top and bottom side. These nocks are often used by recurve archers, since the way they hold the string makes for an asymmetrical shape in the string. The asymmetry of the nock will compensate for this when releasing, making for an easier to tune arrow in some cases. These nocks are suited for use with all standard pins. You can not use these nocks without the use of a pin in the back of the arrow. Models Asymmetric #1 - Small Groove Asymmetric #2 - Large Groove

Special pins to attach your targetface on the target. This is a special kind of big thumbtacks that stay put in both straw and foam targets. Sold per 4 pieces.

The Beiter Limb Line Gauges are a crucial tool when you align your bow. Features – Come in a set of two– Model: Recurve of compound

This nock from Beiter is asymmetrical and specially designed for the larger diameter aluminum shafts, but over time it has also become increasingly popular when using carbon shafts. An asymmetrical nock is a nock that is not equal at the top and bottom. These nocks are mainly used by Recurve and Barebow shooters, because they do not pull the string symmetrically. With an asymmetrical nock you ensure that the arrow leaves the string on the right side and this improves the arrow flight. These nocks are suitable for shafts that can accommodate an S-Size nock, for example: Easton XX75 Platinum Plus 2016 to 2315 Easton XX75 Jazz 2016 Easton X7 Eclipse 2014 to 2315 Easton Gamegetter Easton X23 & X27 Easton RX-7 Most 5/16 carbon shafts that will accept an S-Size nock Features Beiter 19 Asymmetric Nock Weight: 10.6 grains (0.69 grams) Nock fit: Size 1 (Small Groove) or 2 (Large Groove) Material: Plastic Installation: Make sure that the Beiter logo is always visible at the top.

The Beiter Hunter nock is a symmetrical nock by Beiter, especially designed to be used with a D-loop. Using a D-loop is the only way to have the nock symmetrical on the string. This nock fits on most arrows of the biggest diameter, like the Easton X23, and is available in several colours. Features Beiter Hunter Nock: Symmetrical designEspecially for D-loop archersGerman quality and design

The Beiter Clicker Black Blade is one of the most used clickers on the market. It is easy to install and in-use, plus this Beiter Clicker fits on almost every riser.

High-quality nock from Beiter with a diameter of .166. This nock is asymmetrical, an asymmetrical nock is a nock that is not equal at the top and bottom. These nocks are mainly used by Recurve and Barebow archers, because they do not pull the string symmetrically. With an asymmetrical nock you ensure that the arrow leaves the string on the right side and this improves the arrow flight. These nocks are suitable for small diameter shafts of: Black Eagle Victory Gold Tip Skylon - 4.2 series Features Beiter .165 Asymmetric Insert Nocks Weight: 6.1 grains (0.40 grams) Nock fit: Size 1 (Small Groove) or 2 (Large Groove) Material: Plastic Installation: Make sure that the Beiter logo is always visible at the top.

High-quality nock from Beiter with a diameter of .166. This nock is asymmetrical, an asymmetrical nock is a nock that is not equal at the top and bottom. These nocks are mainly used by Recurve and Barebow archers, because they do not pull the string symmetrically. With an asymmetrical nock you ensure that the arrow leaves the string on the right side and this improves the arrow flight. These nocks are suitable for all Easton shafts that can accommodate a G-Nock, below are some examples: Easton XX75 Platinum Plus 1416 to 1916 Easton XX75 Jazz 1214 to 1916 Easton X7 Eclipse 1514 to 1914 Easton Vector Easton Carbon One Easton Avance Easton A/C/E Easton Procomp Features Beiter .166 Asymmetric Insert Nocks Weight: 5.54 grains (0.36 grams) Nock fit: Size 1 (Small Groove) or 2 (Large Groove) Material: Plastic Installation: Make sure that the Beiter logo is always visible at the top.

The Beiter Pin nock Hunter is a symmetrical nock, specially designed to be shot with a D-Loop. These nocks are suitable for all common pins. You cannot use these nocks with arrows that do not have a pin on the back. Models Symmetric #1 - Small Groove Symmetric #2 - Large Groove

The Beiter Clicker is one of the most used clickers on the market. It is easy to install and in-use, plus this Beiter Clicker fits on almost every riser.

The Beier Bow Holder Vise is a great tool when mounting accessories to your bow or to control the limb alignement. Thanks to the 360 degrees rotation, you can hold the bow in almost each position you need! Specifications Beiter Bow Holder Set Vise: Rotation: 360 graden Details set: Beiter Rip-Clutch Square with Adapter 5/16"- 24" Beiter Rip-Clutch Round with adapter 5/16"- 24"

The Beiter Soft Armguard is the upgraded version of the well-known Beiter Armguard. Made from even more flexible material and equipped with 3 straps and fastenings, it fits perfectly along the arm.

Fun to give as a gift or to eat for yourself! Do you know the well-known gummy bears? This is the beiter version of them. Gummy sweets in different fruit flavors in the shape of a nock!

The Beiter Limb Tip Line Gauges help to determine limb straightness and torsion. The Beiter Limb Tip Line Gauges must be placed between the string and the limbs: this avoids the string to be retained in the string groove and shows if the limb alignment is good.

The Beiter plunger button has been a staple product in the archery world for over 30 years. Developed in the eighties and improved upon since then, this plunger proves to be a beautiful piece of engineering. The engraved numbers in the body make it easy to test different setting to then put it back to the original setting if needed. The shaft is made of Stainless Steel and the body is made of anodised aluminium For most modern recurves, we recommend the 17,5-23,0mm size.

With the Beiter Nockdepot you can easily store your nocks, put it in your bag or hang it on your quiver (through the holes on the side it is possible to attach a ring or string to it). 6 Nocks can be clicked on both sides of the nock depot, so a total of 12 nocks fit on 1 depot.In addition to storage, the nock depot can also be used to install or align your nock on the shaft.Available in 3 models: #1 (black)#2 (orange)hunter (green) 

The Rip Clutch by Beiter is the ideal addition to your workbench to hold your bow for you when tuning your bow or if you are looking for a neat way to store your bowwhile still wanting it at the ready.

The Beiter Standard Armguard perfectly meets the needs of all the archers since introduction, preserving the archer’s front part of the arm from being injured by the string. It is possible to combine more Armguard bodies, to make the surface bigger. Each Armguard is delivered with 2 rubber bands and 2 Fasteners, which holds the Armguard in the desired position. The tension of the rubber bands can easily be changed pressing with only two fingers on the Fastener. The Beiter Armguard is available in a wide variety of colours from which the archer can choose: 19!...13 of those are the same colours as the Beiter Nock! All parts are available separately! So you can combine different items (body or fastener) to better suit your national flag or the colours of your club.

This Beiter Serving Winder is one of the most used serving tools by advanced string builders. Because of the weighted screws on the ends of the tool, it's easier to get a consistent tension in your serving. All parts for this winder are also available seperately which means that if something is worn out or broken, it's easy to replace to get you going again.

Replacement end caps from Beiter for the Beiter Clicker. Features: Fits on all clicker models from Beiter. Available colors: Black, Clear, Red, Green

The Beiter Push'N'Pull is a handy tool with which you can easily install, turn or exchange both symmetrical and asymmetrical nocks. The ergonomic design allows even the most stuck nocks to be turned or removed without damaging the shaft.Available in 3 models:#1 (Black)#2 (Orange)Hunter (Green)

Separate rubber membranes for your Beiter V-Box Damper.Comes in four different stiffnesses, for fine-tuning your damper and amount of weight.For the required membrane click on the Basic Kit or the  Steel Basic KitSpecifications Beiter V-Box Damper MembraneMaterial: RubberStiffness: #1, # 3, #5 or #7The Beiter V-Box Damper Membrane is sold individually

The screw attach the Beiter V-Box and weights to your stabilizer. Equipped with an internal hexagon socket.Specifications Beiter V-Box Screw Rear Length: 1", 1.5", 2" and 3" Thread: 5/16"-24UNF

Spacers for mounting screws of the membranes.Properties Beiter V-Box Damper Screw SpacerMaterial: PlasticQuantity: Per 12Diameter: Inner Ø3mm

An adjustable damper for your bow or stabilization. The basic kit includes four different membranes to adjust the stiffness. This way you can fine-tune the damper to your shooting style and amount of weight.Each membrane has a maximum weight at which the damping is optimal.Maximum weight support per membrane:Membrane #1: 5 oz Membrane #3: 5 oz Membrane #5: 10 oz Membrane #7: 10 ozBeiter V-Box Damper Basic KitMaterial: Plastic with Rubber MembraneThread: 5/16"-24 UNFDiaphragms: #1, #3, #5 and #7

Features Beiter Spanner For Button:Use with the Beiter plunger kit Spare part Tool to tighten Beiter Button

Adapters to mount your V-Box on small and large threads.Features Beiter V-Box Adapter ScrewMaterial: Stainless steelThread: 1/4"UNC external to 5/16"UNF external or 1/4"UNC internal to 5/16"UNF external Lengths: 1" or 2"

The screw that secures the front V-Box Weights. Available in different lengths.Features Beiter V-Box Damper Front ScrewMaterial: Stainless steelLength: 28mm, 34mm, 48mm or 61mmThread: 5/16"-24 UNF

The Beiter Bow Wrench is the ultimate tool for adjusting your bow. It features both inch and metric Allen keys, as well as a Phillips screwdriver.Beiter Bow Wrench FeaturesInch sizes: 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16Metric sizes: 1.5mm, 2.5mm, 3.0mmScrewdriver: 2.8mm Phillips

A spacer ring for beiter weights.Specifications Beiter V-Box Compensation SpacerMaterial: PlasticInner diameter: 5/16 inchColor: Blue, Neon Yellow, White, Purple, Black, Red, Pink, Orange, Green and YellowQuantity: Per 6

A complete starter set of the Beiter V-Box. The Beiter V-Box is an adjustable damper for your bow or stabilization. The basic kit includes four different membranes to adjust the stiffness. This way you can fine-tune the damper to your shooting style and amount of weight. Each membrane has a maximum weight at which the damping is optimal. Maximum weight support per membrane: Membrane #1: 5 oz Membrane #3: 5 oz Membrane #5: 10 oz Membrane #7: 10 ozSpecifications Beiter V-Box Damper Starter EditionBeiter V-Box Basic kit incl. Membrane #1 #3 #5 and #7 3x 1oz V-Box Stainless Steel Weight8x V-Box Weight Spacer in various colors3x Baseplate 20mm, 23mm and 26mm1x 34mm weight screwChoice of 1/4" adapter (small), 2x 5/16" adapter (large) or an internal 1/4" adapter (small)

A transition piece made of plastic for a smooth transition between your Beiter V-Box and your stabilizer.Specifications Beiter V-Box BaseplateMaterial: PlasticSizes: Ø30-Ø20, Ø30-Ø23 and Ø30-Ø26 mmThickness: 7mmInside diameter: 5/16"Quantity : Per 3

Black replacement wheel with screw for Beiter Clicker