Bows

The Bodnik Bows Kiowa is a small bow. Despite the fact it’s 52 inch, it is comfortable and supple to draw till 30 inch. The Kiowa is suited for use on difficult terrain. The Bodnik Bows Kiowa comes with: Whisper string Arrow rest Shelf rest Nock ring Specifications: Bowlength: 52 inch Available drawweights: 20 – 55 lbs (in increments of 5 lbs) Riser: Mycarta and Cocobolo Limbs: Bamboo, Olivewood Veneers, Crystal Clear Bodnik Bows Power Glass, Stabil Core Tips: Multi-Layered Mycarta Grips: Pistol grip Advised string: Whisper String Advised brace height: 8 inch Warranty: 30 years

the Kinetic Palmaris limbs are built up using layers of Nano-carbon and foam, ensuring extreme amounts of stability, less vibration and a smoother draw curve. The design of these limbs will result in better energy storage and therefore higher arrow speeds. The integrated limb tips made it possible to leave them quite narrow and keep the mass weight down. These limbs are reinforced at the points of contact with the riser. Specifications Kinetic Palmaris Carbon Foam: Materials: Foam and 3K Nano-Carbon Fitting: ILF String: Fast Flight or similar Lengths: Short 66" - Medium 68" - Long 70" Draw weights: 20 to 44 lbs (in 2 lbs increments) Explanation Length Recurve Limbs The length of recurve limbs are typically based on the use of a 25 inch riser. Most limbs come in three sizes: Short, Medium and Long. This will get you the following lengths: Short: 66 inch bow Medium: 68 inch bow Long: 70 inch bow Of course you can also use these limbs on different lengths of risers, however, you will have to take into account that besides changing the total length of the bow, you will also change the draw weight. As a rule of thumb, you can add roughly 1 pound per decreasing inch and subtract roughly 1 pound per inch you add to your set-up. Please be mindful of the fact that this is purely meant as a rule of thumb and not the absolute truth. There may be differences due to the vast selection of materials, shapes and combinations.

In its tenth and greatest configuration, the new Supra X embodies decades of championships and podium finishes. The Supra X is truly a marvel of modern engineering - and has been put through its paces in tests by the greatest archers of all time. The result is the most stable and consistent bow on the market, according to PSE. The Supra X gives archers what they need to collect world titles and dominate the field. Features PSE Supra X Cam types The Supra X is available in 3 different cam types. The EM2 Cam offers excellent speed even at shorter draw lengths and has a fixed let-off of 75%, the draw length of this cam is adjustable from 23 to 29 inches. The M2 Cam has an adjustable draw length of 26 to 30 inches and 3 let-off choices, 65, 70 or 75%. And for longer draw lengths there is the SE2 Cam, which has an adjustable draw length from 26.5 to 32 inches and a let-off choice of 65, 70 or 75%. FDS - Full Draw Stability PSE's FDS system (Full Draw Stability) is designed in such a way that there is much less torsion at full draw, this is the moment when bows are very sensitive to torsion. EZ.220 - Snap Spacer System The PSE EZ220 system makes it easy to adjust your bow. Using spacers you can easily move the cam in the axle. By repositioning the spacers in the axle it is possible to make adjustments in 0.020" increments PSE Modular Target Grip The Supra X is equipped with modular Grips, which makes it possible to easily adjust the grip angle to 0.4, 8 or 12 degrees. QAD Integrate & HAMSKEA Integrate Arrow Rest Mounts The Supra offers the option of installing integrated arrow rests such as the QAD Integrate and the Hamskea Epsilon, this method of attachment ensures improved weight distribution on the bow. Of course it is also possible to place arrow rests on the side of the bow. PSE Fixed Cable Guard System The fixed cableguardsystem features a stainless steel cable rod, this system provides virtually frictionless operation for better performance. The stainless steel rod is threaded, ensuring a safe and reliable connection to the bow. It is strategically positioned to provide improved vane clearance and overall torsional stability. PSE Limb Vise Pocket System PSE Limb Vise Pocket System: Designed to provide superior stability through an improved limb lock system. Ensuring that the limbs make contact with the riser at the pivot point provides optimal stability, regardless of whether the limbbolts are turned out. Specifications PSE Supra X Draw length: EM2: 23-29 inches | M2: 26-30 inches | SE2: 26.5 - 32 inches Draw weight: 40, 50, 60 ATA speed: EM2: 330 FPS | M2: 340 FPS | SE2: 328 FPS Axle to Axle: 37 inches Brace Height: EM2: 7 inches | M2: 7 inches | SE2: 7 3/8 inches Let-off: EM2: 75% | M2: 65, 70 or 75% | SE2: 65, 70 or 75% Material: Aluminum Cam Type: EM2, M2 or SE2 Colors: Black, White, Navy Blue, Black Cherry, Charcoal, Purple

The 13 inch Mohawk Hunter handle is made of a combination of Bubinga and Mycarta. With the perfect grip and a stiff riser, maximum stability is ensured. This riser can be combined with the Mohawk Recurve limbs and the Mohawk Hybrid limbs. If you combine the long Mohawk Recurve Limbs or the Hybrid Limbs with the 13” handle you will have a 58 inch bow If you combine the short Recurve Limbs with the 13“ handle you will have a 56 inch bow Specifications Bearpaw Mohawk Hunter Handle: Length of handle: 13 inches Weight of handle: Approximately 475 gram Handle materials: Bubinga with hard maple and mycarta accent stripes Warranty: 30 years Bodnik Bows warranty Quality: German Quality

The Bearpaw Penthalod Chapman is a great choise for those looking for a strong, Take Down fieldbow for a decent price. The limbs are made of maple and black fibreglass. The Riser is made of Amazakoué / Ovangkol which gives the bow its stability. And besides that, the looks of this bow are something we cannot forget to mention. The bow is available in drawweights from 25 till 55 lbs in small steps of 5 lbs. Besides that the limbs are available separately which means the bow can grow with you. The Bearpaw Penthalon Chapman comes with: Whisper string Arrow rest Shelf rest Nock ring Specifications: Bow Length: 58 inches Draw Weight: 25 -55 lbs in 5 lbs steps Handle: Amazakoué / Ovangkol with ash and Mycarta accent stripes Limbs: Maple and Bearpaw black glass Tips: Reinforced Grip: deep Pistol grip String: Whisper String (and all other high energy strings) Brace Height: 8 inchs Guarantee: This bow is warranted against breaking or de-laminating for a period of two (2) years

The PSE Force FDS Compound Package combines the proven Force platform with a complete Ready-To-Hunt accessory kit. Built around the FDS Cam System and a compact 30" axle-to-axle design, it delivers powerful performance along with essential accessories for a ready-to-shoot setup. Features PSE Force FDS Compound Package FDS Cam System with fixed 85% let-off EZ.220™ snap spacer cam tuning system Picatinny sight rail and IMS™ rest mounting IBO speed: 335 FPS Axle-to-axle length: 30" Brace height: 6 5/8" Draw length range: 25.5"–31" Draw weight options: 50, 60, 70 lbs Includes Torment 5-arrow quiver Includes Phantom drop-away rest Includes Recon 6" stabilizer Includes Sierra Micro 5-pin sight Includes sling, peep, and D-loop

The Bodnik Bows Tombow is a very powerful recurve bow. Despite its short length of only 50 inch a drawlength of 30 inch is not a problem. Of course the Tombow is also very popular with youthful archers because of its size. This bow is very fast, even with shorter drawlengths. The Bodnik Bows Tombow comes with: Whisper string Shelf rest Nock ring Specifications: Bowlength: 50 inch Available drawweights: 15 – 30 lbs (in increments of 5 lbs) Riser: Walnut Limbs: Cherry wood Tips: Mycarta Grip: Locator grip Advised string: Whisper String Advised brace height: 6,75 inch Warranty: 30 years

The PSE Force FDS Compound Bow combines reliability with modern engineering to deliver strong field performance. Featuring the FDS Cam System with a fixed 85% let-off, it provides smooth draw characteristics and powerful arrow speeds in a compact 30" axle-to-axle platform. Features PSE Force FDS Compound Bow FDS Cam System with fixed 85% let-off EZ.220™ snap spacer system for cam lean tuning Picatinny sight rail for direct-to-riser mounting IMS™ dovetail rest mounting system PBTS three-piece string configuration Limb Vise pocket with centered pivot interface Axle-to-axle: 30" IBO speed: 335 FPS Brace height: 6 5/8" Mass weight: 4.5 lbs Draw length range: 25.5"–31" Draw weight options: 50, 60, 70 lbs

The riser is produced from extremely stable Actionwood and gives this take down recurve great stability and damping. Together with the producers Bearpaw was able to design a riser that sits really securely and firmly in the hand and looks great too! The dark look to this riser compliments the looks of the black limbs perfectly and makes the Mohican a real looker! Specifications Bearpaw Mohican Riser: Length of Handle: 19 inches Wood Handle: Dark actionwood with ash and macore accent stripes Riser Accessories: Inserts for sight or bow quiver, stabilizer or fishing rod, and plunger button Use: Only in combination with the Bearpaw Mohican Limbs Guarantee: 2 years.

For the Mohawk handle Bearpaw chose Bubinga for it’s good looks and because its mass weight absorbs all the residual energy after the shot. Because of that, they were able to guarantee when you shoot a Mohawk, there will be no noticeable hand shock. Mohawk risers are made with Bubinga laminated with beautiful contrasting Maple and Micarta, resulting in a very stiff handle that ensures maximum stability! The 17 inch Mohawk handle is now in the hands of instinctive archers and bowhunters in every continent! This is the original Mohawk and the handle that established the fame of the Mohawk around the world. This is a bow, that when you pick it up you notice immediately how good it feels in your hand! If you combine the long Mohawk Recurve Limbs or the Hybrid Limbs with the 17 ” handle you will have a 62 inch bowIf you combine the short Recurve Limbs with the 17“ handle you will have a 60 inch bow Specifications Bearpaw Mohawk Handle: Length of handle: 17 inches Weight of handle: Approximately 572 g, (1,26 lbs) Handle materials: Bubinga with hard maple and mycarta accent stripes Warranty: 30 years Bodnik Bows Garantie Quality: German Quality

When this bow got introduced to the world in 2011, this bow, aptly named after the Au Sable river in Michigan, the Bear Au Sable bow was immediately a success. With it's large sight window and full radiused grip, this bow is very comfortable to shoot. Due to the laminated limbs of maple and bamboo, the bow packs a punch in both short and long draw lengths. The riser section is built up using African Bubinga for a high quality look and feel. To finish the grip off, it's wrapped with supple leather. Specifications Bear Au Sable: Bow length: 64 inch Available draw weights: 35-60 lbs in 5 lbs increments Riser material: Bubinga Limb materials: Bamboo and maple Grip: Full radiused grip Standard string: Dynaflight 97 Please note, this bow is not always in stock and may have to be ordered. This can add up to a longer lead time than you are used to from us.

The Oak Ridge Viridian is a 62 inch take-down recurve field bow made by Win&Win. The limbs are made of maple wood with black fiberglass for a nice traditional look. Combined with the 20 inch Oak Ridge Viridian handle you get a nice, well priced field bow. The limbs of the Viridian are reinforced, allowing you to shoot with a fast flight (or equivalent) string. As an added advantage, both the handle and the limbs are the same fit as the popular Samick Sage. This means you can combine the riser of the one brand and the limbs of the other. Specifications Oak Ridge Viridian: Bow length with Viridian handle: 62inch Material limbs: Maple and fiberglass Tips: Reinforced Advised String material: Fast Flight Fitting: Screw-on Possible to combine with Samick Sage

ILF limbs from Wild Mountain with a very classic matte black look. Fits on all ILF risers. Specifications Wild Mountain ILF Limbs: Material: Maple with fibreglass Sizes: Medium – Long Draw weights: 20 – 40 LBS Tips: Reinforced (fast flight proof) Guidelines Riser and Limbs combinationThe draw weight of Wild Mountain ILF limbs are measured on a 25 inch riser. It is generally possible to use limbs on a shorter or longer riser, but consider that there will be a change of draw weight, a general rule of thumb is that for every inch difference the draw weight will change 1 LBS, for example: Wild Mountain ILF limbs (medium) with a draw weight of 30 LBS with a: 25 inch riser makes a 68 inch bow with a draw weight of 30 LBS 23 inch riser makes a 66 inch bow with a draw weight of 32 LBS 19 inch riser makes a 62 inch bow with a draw weight of 36 LBS Also consider that draw weight of ILF limbs are generally measured at a draw lenght of 28 inch, as a rule of thumb you need to add 2 LBS of draw weight for every inch you draw more then 28 inch and vice versa. All this instructions are to be considered as GUIDELINES as the different form and construction of a limb and/or riser can give higher ore lesser results, nonetheless it is a good base to start from.

Features White Feather Nightjar: Length: 19 inches Fitting: ILF Weight: 1060 grams Material: Aluminum Handle: Wood Warranty: 2 year warranty Delivered with sleeve and Allen keys The 10% online discount does not apply to this product

This Gillo handle is developed by Olympic Medallist Michele Frangilli. This is an ILF riser, meaning you can use limbs of nearly all manufacturers. This handle uses a unique floating limb pocket design, making it possible to adjust up to 30% of draw weight with one pair of limbs. This riser is compatible with all G1 and G4 barebow weights and even the UFO mount. the high quality anodised finish, the wooden grip and the fact your handle will be shipped in a nice sleeve makes this a neat total package. Specifications Gillo GT27: Use: RH Fitting: ILF Colors: Blue, Green, Grey, Purple, Red, Orange Material: Anodised Aluminium Length: 27 inch Weight: 1480 grams Please note, left-handed risers are only available in Blue, Grey and Red.

The Bearpaw Twin Hero risers are made from an attractive combination of dark, smokey Actionwood with hard maple and padouk accent stripes. The appealing combination of beautiful woods give the Bearpaw Twin Hero risers a special, classic look. This riser combined with the Limbs Young Hero makes sure you have a super cool Bearpaw Take-down bow. In order to accommodate the needs and preferences of various traditional archer’s, the Twin Hero risers allow either shooting off the shelf or the use of elevated arrow rests. All Twin Hero risers include inserts for sights, bow quivers, stabilizers, and plunger buttons. The Bearpaw Twin Young Hero Riser is the basis of the Bearpaw Young Hero bow with a length of 54 inches. Specifications Bearpaw Handle Twin Young Hero: Weight: 590 gram Material: Actionwood, padouk and maple Riser accessories: Sight/bowquiver, stabilizer, button Warranty: 2 years Use: Only in combination with the Bearpaw Young Hero Limbs

The Bearpaw Young Hero risers are made from an attractive combination of dark, smoky Actionwood with hard maple and padouk accent stripes. This appealing combination of beautiful woods gives the Bearpaw Hero risers a special, classic look. In order to accomodate the needs of various traditional archer’s preferences they have designed the Young Hero risers to allow either shooting off the shelf or the use of elevated arrow rests. They use only the best quality materials in the risers of the Hero series and because of this, archers may use any high performance bowstrings they desire. All Hero risers include inserts for sights, bow quivers, stabilizers, and plunger buttons. The Young Hero riser of the Hero Series is the basis for the Young Hero bows in 54inch length. Specifications Bearpaw Hero Riser: Weight: 590 grams Riser Materials: Dark Actionwood with accent stripes of padouk and hard maple Riser Accessories: Inserts for sight or bow quiver, stabilizer or fishing rod, and plunger button Guarantee: 2 years Use: Only in combination with the Bearpaw Young Hero Limbs

This extra long Gillo handle is developed by Olympic Medallist Michele Frangilli. The extra length plays into barebow shooters that do string walking and people with very long draw lengths to keep the draw cycle smooth. This is an ILF riser, meaning you can use limbs of nearly all manufacturers. This handle uses a unique floating limb pocket design, making it possible to adjust up to 30% of draw weight with one pair of limbs. This riser is compatible with all G1 and G4 barebow weights and even the UFO mount. the high quality anodised finish, the wooden grip and the fact your handle will be shipped in a nice sleeve makes this a neat total package. Specifications Gillo GT29: Use: RH Fitting: ILF Color: Brown Material: Anodised Aluminium Length: 29 inch Weight: 1550 grams

The Penthalon Chapman handle made of Amazakoué / Ovangkol is a perfect combination of weight, stability and design. The goal was to design and build the best design with the highest stability, which is responsible for maximum damping. They definitely succeeded. Specifications Bearpaw Chapman Riser: Length of Handle: 17 inches Wood Handle: Amazakoué / Ovangkol, maple and Mycarta accent stripes Quality: Design & Engineering in Germany Guarantee: 2 years Use: Only in combination with the Bearpaw Chapman Limbs

The Oak Ridge Viridian is a 62 inch take-down recurve field bow made by Win&Win. The limbs are made of maple wood with black fiberglass for a nice traditional look. Combined with the 20 inch Oak Ridge Viridian handle you get a nice, well priced field bow. The limbs of the Viridian are reinforced, allowing you to shoot with a fast flight (or equivalent) string. As an added advantage, both the handle and the limbs are the same fit as the popular Samick Sage. This means you can combine the riser of the one brand and the limbs of the other. This Oak Ridge bow gets shipped with: Oak Ridge Viridian Riser Oak Ridge Viridian Limbs B50 traditional string Traditional arrow rest Two nocking points Specifications Oak Ridge Viridian: Bow length: 62inch Material limbs: Maple and fiberglass Material handle: Walnut, oak & ash Tips: Reinforced Fitting: Screw-on Possible to combine with Samick Sage, Black Sheep Nova or Bearpaw HeroLeft Handed bow only.

The Bearpaw Mohican is pleasant to hold, the riser is made of actionwood and fits perfectly with the black limbs. Especially for beginning archers this is a bow to consider. Besides its beautiful looks, the Mohican shoots very smooth. The recurve limbs are easy to draw till 32 inch and offer a stable and fast shot. This bow will definitely get you addicted to archery from your very first shot. The Bearpaw Mohican comes with: Whisper String Shelf rest Nock ring Specs Bearpaw Mohican Bowlength: 60 inch Drawweight: 30 -50 lbs (in increments of 5 lbs) Riser: Actionwood, Bubinga, Maple Limbs: Maple and Bearpaw black glass Tips: Mycarta Grip: Pistol grip String: Whisper String Brace Height: 8 inch Quality: Bodnik Bow design, made in Germany Warranty: 2 years

This riser is a good fit for the starting recurve archer. Fits all accessoires like a sight, stabilizer, button and clicker. Only suited with the Core Archery limbs.The 24 inch Core Silhouette riser makes a 66, 68 or 70 inch bow, depending on the limbs you pick. Specifications Core Silhouette: Length: 24 inch Fitting: Screw-on Weight: 910 gr. Material: Aluminum Right handed only