Skylon

The Skylon Bruxx arrows are constructed from 24-TON Carbon with an 8.0mm internal diameter this arrow is suitable for compound bows to use for indoor and 3-D shooting. Straightness: +/- 0.015" Inner Diameter:8.0mm / .315" Material: 24-TON Carbon Fletched with vanes (colour varies) With Pin-insert and large pin-nock (colour varies) Shaft length: 33"

With these pin inserts from Skylon you can provide your set of Skylon Brixxon or Skylon Radius arrows with a pin nock. Without these pin inserts, the Pin Nocks will not fit and you need the so-called ID4.2 Innerfit nocks. The advantage of using Pin Inserts is that this metal pin protects the back of your arrow just a little better, useful when you occasionally shoot a 'Robin Hood'. Pay attention to the spine of your arrows, the different spines do not all have the same outer diameter, for a nice fit you need the right size. 

These Skylon ID3.2 Collars (also called Protector Hats) are attached to the back of your arrow and offer protection when shooting a 'Robin Hood'. The Collar is placed between the shaft and the nock. Suitable for the Skylon shafts with an inner diameter (ID) of 3.2mm. Make sure you select the correct spine.

Features Skylon Carbon Fastwing ID6.2 Complete Arrow: Material: Carbon Length: 30 Inch Model:-Light (450-500) -Medium (400-450) -Strong (300-350)  Color: -Yellow/White (Light) -Red/White (Medium) -Green/White (Strong) Includes: Point, nocks and vanes

Customize your Skylon Carbon Brixxon Arrow!  Specifications Skylon Carbon Brixxon Arrow:Shaft length: 32 inchMaterial: 24-TON Carbon ID: 4.2mm / .166″ (G size) Straightness tolerance: +/- .0015″ SPINE OUTSIDE DIAMETER GRAIN PER INCH LENGTH POINT 1100 5.22mm 4.64 32" 60-70-80gr 1000 5.32mm 4.90 32" 60-70-80gr 900 5.36mm 5.34 32" 60-70-80gr 850 5.42mm 5.48 32" 60-70-80gr or 80-90-100gr 800 5.48mm 5.80 32" 60-70-80gr or 80-90-100gr 750 5.50mm 5.94 32" 80-90-100gr 700 5.58mm 6.17 32" 80-90-100gr 650 5.60mm 6.42 32" 80-90-100gr 600 5.71mm 7.09 32" 80-90-100gr or 100-110-120gr 550 5.77mm 7.47 32" 80-90-100gr or 100-110-120gr 500 5.88mm 8.00 32" 80-90-100gr or 100-110-120gr 450 5.99mm 8.63 32" 100-110-120gr 400 6.13mm 9.47 32" 100-110-120gr Please note: This product is handmade, so delivery time may be slightly longer than usual. Custom-made products cannot be exchanged.

These Skylon Carbon Instec shafts have an inner diameter of 5.2mm and are made of 24T carbon. With their small diameter, these shafts are ideally suited for outdoor or 3D use. The ID5.2 components such as nocks and inserts fit on these shafts, but various parts from other brands can also be used.Nocks and inserts are included.Points not included.Specifications Skylon Carbon Instec Shafts:Material: 24-Ton CarbonInnerdiameter: 5.2mm / .204inch (X-size)Straightness: .006inchMaximal Shaftlength: 33inchPoint diameter: 9/32 SPINE LENGTH GPI OUTSIDE DIAMETER 300 33" 9.44 6.89mm 350 33" 8.70 6.73mm 400 33" 8.16 6.65mm 500 33" 6.80 6.46mm 600 33" 6.19 6.36mm 700 33" 5.24 6.21mm

Innferfit nocks from Skylon. These X-size nocks are used in arrows with an innder diameter (ID) of 5.2mm like the Skylon Carbon Ebony, Skylon Carbon Instec or Skylon Carbon Quantic.

These points from Skylon are suitable for the ID8.0 mm arrows from Skylon, for example, but also fit on other shafts with the same diameter. These points are degradable (100,110 or 120 grain) and must be glued into the shaft. Suitable for all Skylon ID8.0 shafts from spine 300 to spine 500.

Skylon id8.0 s-size Uni Bushing Insert

Innferfit nocks from Skylon. These X-size nocks are used in arrows with an innder diameter (ID) of 5.2mm like the Skylon Carbon Ebony, Skylon Carbon Instec or Skylon Carbon Quantic.

Features Skylon Novice ID4.2 Glue-in Point: One-piece Inside diameter: 4.2mm Spine: -500/800 (90gr) -900/1500 (70gr) -1500/2000 (50gr) Set of 12

These ultra thin Performa shafts from Skylon are the ideal upgrade for the more advanced archer. With an inner diameter of 3.2mm, this shaft has an outer diameter of 4.45 at the weakest spine (1000) and 5.25mm at the stiffest spine (350). This ensures minimal influence of the wind, making it easier to shoot smaller groups, especially at long distances.Various spare parts are available separately for these Skylon Carbon Performa shafts. For example, the shafts are equipped with an ID3.2 pin adapter to which the pinnocks of, for example, Skylon or Easton fit. In addition, there are different points available which can be ordered per spine for a perfect fit. It is also possible to provide the arrows with a Skylon Collar, also called a protector hat, which provides extra strength at the front and/or back. Specifications Skylon Carbon Performa Shafts:Material: 40-TON CarbonInner Diameter (ID): 3.2 mm / 0.125inchStraightness: ±0.006 inch SPINE LENGTH GPI OUTSIDE DIAMETER RECOMMENDED POINT (GRAIN) 350 32" 8.47 5.25mm 100-110-120 400 32" 7.93 5.17mm 100-110-120 450 32" 7.42 5.04mm 100-110-120 500 32" 6.90 4.90mm 100-110-120 550 32" 6.50 4.84mm 100-110-120 600 32" 6.10 4.78mm 100-110-120 650 31" 5.83 4.73mm 80-90-100 700 31" 5.55 4.67mm 80-90-100 750 31" 5.31 4.63mm 80-90-100 800 31" 5.06 4.59mm 80-90-100 850 30" 4.94 4.55mm 80-90-100 900 30" 4.81 4.50mm 60-70-80 1000 30" 4.70 4.45mm 60-70-80

Features Skylon X-Bow Composite Bolts: Material: 70% Carbon and 30% Fiberglass For crossbows up to 350fps Includes halfmoon nocks, instert, and screw-in point (11/32 100gr) Inside diameter: 7.6mm Outside diameter: 8.7mm Grains per inch: 9.7 Length: 16/18/20/22 inches

Aluminium Pin Insert for the Skylon Bruxx and Empros shafts or shafts with an internal diameter of 8.0mm.

Features Skylon Brass ID6.2 Break-off Point Inserts: Material: Brass Inner diameter: 6.2mm / 0.244” Weight: 100-125-150 Spine: 300/350-400/500-800

Features Skylon Drakon Crossbow Bolt Nock: Nocks for crossbow bolts Available in Green or White

Features Skylon Carbon Instec ID5.2 Complete Arrow: Material: 24-TON Carbon Length: 33 Inch Inside diameter: 5.2mm / .204” Straightness tolerance: .003” Spine: 300/350/400/500/600/700Includes blazer vanes, in-nock and insert 

Features Skylon Drakon Crossbowbolt Point: For the Skylon Drakon crossbow bolts

These extremely thin shafts Carbon Paragon from Skylon are the perfect basis for the avid and advanced shooter looking for more speed and consistency when shooting. With a diameter of only 5.25mm on the stiffest spine and a straightness tolerance of 0.0015 inch, these shafts are the right choice. Shooting smaller groups than before is a lot easier with these shafts. Specifications Skylon Carbon Paragon Schaft:Material: 40-TON CarbonInner Diameter: 3.2 mm / 0.125 inchStraightness: .0015 inchSpines: 350 - 400 - 450 - 500 - 550 - 600 - 650 - 700 - 750 - 800 - 850 - 900 - 1000 SPINE LENGTH GPI OUTSIDE DIAMETER RECOMMENDED POINT (GRAIN) 350 32" 8.47 5.25mm 100-110-120 400 32" 7.93 5.17mm 100-110-120 450 32" 7.42 5.04mm 100-110-120 500 32" 6.90 4.90mm 100-110-120 550 32" 6.50 4.84mm 100-110-120 600 32" 6.10 4.78mm 100-110-120 650 31" 5.83 4.73mm 80-90-100 700 31" 5.55 4.67mm 80-90-100 750 31" 5.31 4.63mm 80-90-100 800 31" 5.06 4.59mm 80-90-100 850 30" 4.94 4.55mm 80-90-100 900 30" 4.81 4.50mm 60-70-80 1000 30" 4.70 4.45mm 60-70-80

Features Skylon Carbon Phoric ID6.2 Complete Arrow: Material: 24-TON Carbon Inside diameter: 6.2mm / .244” Straightness tolerance: .003” Length: 33” Spine: 350/400/500/600/700 Includes Blazer vanes / compound pin nock / insert 

The Skylon Empros 23 arrows are constructed from 24-TON 3K Carbon with an 8mm internal diameter this arrow is suitable for compound bows to use for indoor and 3-D shooting. Shaft length: 33 inch Straightness: +/- 0.003" Inner Diameter:8.0mm / .315" Material: 24-TON 3K Carbon Including Uni bushing for S-size nock

With these Pin Inserts from Skylon you can provide your set of Skylon arrows with a pin nock. Pin inserts give arrows just a little more strength at the back and protect the arrows when shooting a 'Robin Hood'.These Skylon ID3.2 Pin Inserts fit Skylon (or other brands) shanks with an ID of 3.2mm. 

the Skylon Preminens is a very slim shaft for the advanced shooter. With only 5.25mm diameter for the stiffest spine and a mind boggling 4.73mm for the weakest, you'll easily shoot good groups in the wind and on longer distances. These shafts also have a very small straightness tolerance to ensure you of a well matches set of arrows. The inner diameter is 3.2mm, so all of Skylons 3.2mm accessories are fit for use with these shafts. Specifications Skylon Preminens: Spines: 650, 600, 550, 500, 450, 400, 350. Inner diameter: 3.2mm Material: 40-ton carbon Includes a pin to fit nocks on. SPINE LENGTH GPI OUTSIDE DIAMETER RECOMMENDED POINT (GRAIN) 350 32" 8.47 5.25mm 100-110-120 400 32" 7.93 5.17mm 100-110-120 450 32" 7.42 5.04mm 100-110-120 500 32" 6.90 4.90mm 100-110-120 550 32" 6.50 4.84mm 100-110-120 600 32" 6.10 4.78mm 100-110-120 650 31" 5.83 4.73mm 80-90-100

Features Skylon 3K Carbon Quantic ID5.2 Shaft: Material: 24-TON 3K Carbon Length: 33 Inch Inside diameter: 5.2mm / .204” Straightness tolerance: .003” Spine: 300/350/400/500/600/700

Set of 6 crossbow bolts for the Junxing Drakon crossbow.Features Skylon Drakon Carbon Crossbow BoltsLength: 13 inchesMaterial: carbonHalf moon nockTraining pointComes with white or green vanesCan only be used with the Junxing Drakon crossbow

The Skylon Precium Shafts are ultra thin 3.2mm carbon shafts suitable for the avid and advanced shooter. With an outer diameter of only 5.25mm on the stiffest spine (350), these shafts have little wind problems, making shooting smaller groups at long range a lot easier. Various parts are available separately for these Skylon Carbon Precium shafts. For example, the shafts are equipped with an ID3.2 pin adapter to which the pin nocks   of, for example, Skylon or Easton fit. In addition, there are different points available which can be ordered per spine for a perfect fit. It is also possible to provide the arrows with a Skylon Collar, also called a protector hat, which provides extra strength at the front and/or back. SPINE LENGTH GPI OUTSIDE DIAMETER RECOMMENDED POINT (GRAIN) 350 32" 8.47 5.25mm 100-110-120 400 32" 7.93 5.17mm 100-110-120 450 32" 7.42 5.04mm 100-110-120 500 32" 6.90 4.90mm 100-110-120 550 32" 6.50 4.84mm 100-110-120 600 32" 6.10 4.78mm 100-110-120 650 31" 5.83 4.73mm 80-90-100 700 31" 5.55 4.67mm 80-90-100 750 31" 5.31 4.63mm 80-90-100 800 31" 5.06 4.59mm 80-90-100 850 30" 4.94 4.55mm 80-90-100 900 30" 4.81 4.50mm 60-70-80 1000 30" 4.70 4.45mm 60-70-80

Features Skylon 3K Carbon Quantic ID5.2 Complete Arrow: Material: 24-TON 3K Carbon Length: 33 Inch Inside diameter: 5.2mm / .204” Straightness tolerance: .003” Spine: 300/350/400/500/600/700Includes blazer vanes, in-nock and insert 

Features Skylon 3K Carbon Maverick ID6.2 Shaft: Material: 24-TON 3K Carbon Length: 33 inches Inner diameter: 6.2mm / .244 inch Straightness tolerance: .003 inch Spine: 300/350/400/500Includes inside nock and insert

Features Skylon 3K Carbon Maverick ID6.2 Complete Arrow: Material: 24-TON 3K Carbon Length: 33 Inch Inside diameter: 6.2mm / .244” Straightness tolerance: .003” Spine: 300/350/400/500Includes blazer vanes, in-nock and insert 

Features Skylon Carbon Phoric ID6.2 Shaft: Material: 24-TON Carbon Inside diameter: 6.2mm / .244” Straightness tolerance: .003” Length: 33” Spine: 350/400/500/600/700 Includes compound pin nock / insert 

With the Skylon Measuring Arrow you can quickly and accurately measure your draw length. The clear markings indicate exactly the pulling length measured from the groove of the ridge. Made of light carbon and equipped with a small groove pin-nock.Features Skylon Carbon Arrow Length Indicator: Easily check your draw length Measuring starts from the groove of the nock to the marked lines on the shaft Allows you to measure from 20" to 32" Comes with pin nock installed This arrow is not intended for shooting

Features Skylon 3K Carbon Backbone ID5.2 Complete Arrow: Material: 3K 24-TON Carbon Inside diameter: 5.2mm / .204” Straightness tolerance: .003” Length: 33” Spine: 300/350/400/500/600/700 Includes feathers (4") / in-nock / insert 

Features Skylon 3K Carbon Empros ID8.0 Complete Arrow: Ideal for indoor compound Material: 3K full carbon Straightness tolerance: .003” Inner diameter: 8.0mm / 0.315”Length: 33” Spine: 300/350/400/500 With Uni bushing and S nock Including vanes Sold per 6 pieces

These are Skylon's pin inserts made for carbon arrows with an internal diameter of 5.2mm.

Features Skylon Brass ID5.2 Break-Off Point Inserts: Material: Brass Inner diameter: 5.2mm / 0.204” Weight: 100-125-150 Spine: 300/350/400/500/600/700