Beautiful and high quality ILF riser by Wild Mountian. The riser is made of laminated wood, because of the colours of the woodlayers and the wood structures none of the riser look exactly the same, so an unique riser.
Both adjusting the tillerheight and aligning the limbs is easy to do. There are no options for a button, sight, or stabilizer.
Specifications Wild Mountain ILF Riser:
Length: 17 inch, 19 inch or 21 inch
Colours: Black, honey, green, red, walnut, brown or white
Available in left- and righthanded version
Points of attention when using ILF limbsAll ILF limbs fit this riser, even the ones used on Olympic Recurve bows. Just be aware that the drawweights of these bows are usually measured on a 25 inch riser, unless otherwise indicated. For every inch shorter in length the drawweight increases with 1 lbs. A 30 lbs limb will produce a 36 lbs on a 19 inch riser.
The drawweight of most limbs is measured on 28 inch drawlength, with a longer drawlength the limb will produce more power and with a shorter drawlength less power.
ILF limbs from Wild Mountain with a very classic matte black look. Fits on all ILF risers.
Specifications Wild Mountain ILF Limbs:
Material: Maple with fibreglass
Sizes: Medium – Long
Draw weights: 20 – 40 LBS
Tips: Reinforced (fast flight proof)
Guidelines Riser and Limbs combinationThe draw weight of Wild Mountain ILF limbs are measured on a 25 inch riser. It is generally possible to use limbs on a shorter or longer riser, but consider that there will be a change of draw weight, a general rule of thumb is that for every inch difference the draw weight will change 1 LBS, for example:
Wild Mountain ILF limbs (medium) with a draw weight of 30 LBS with a:
25 inch riser makes a 68 inch bow with a draw weight of 30 LBS
23 inch riser makes a 66 inch bow with a draw weight of 32 LBS
19 inch riser makes a 62 inch bow with a draw weight of 36 LBS
Also consider that draw weight of ILF limbs are generally measured at a draw lenght of 28 inch, as a rule of thumb you need to add 2 LBS of draw weight for every inch you draw more then 28 inch and vice versa. All this instructions are to be considered as GUIDELINES as the different form and construction of a limb and/or riser can give higher ore lesser results, nonetheless it is a good base to start from.
€129.95
This website uses cookies to ensure the best experience possible. More information...
