The WNS Bow Square is a crucial tool when setting up your bow and should be in every archers basic kit. From brace height to nock points to tillering, the bow hook is used for it all.
Feautures
Simple and effective bow tuning essential.Ideal for measuring nock position, tiller and bracing height.12″ long marked in inches and cm.
Short bowstand from Winners.
Features
Stable, three-legged design.Adjustable height string holder.Ground spike for added stability.Suitable for recurve and compound.Various colours available.
The Arrow Puller by WNS (Winners) with magnetic clip to attach to for example your arrowbag. The arrowpuller protects your hand and the arrow when pulling the arrows and gives extra grip (especially when it is raining).
Features WNS Arrow Puller With Magnetic Clip:
Material: rubber
With magnetic clipColor: Black
The leather fingertab by WNS. This tab has an aluminium base with anchor plate, finger spacer and fingerhook. All parts can be adjusted which makes it adjustable to your preferences.
Specifications WNS Tab SF-100:
Material: Leather and aluminium
Sizes: Small, medium and large (colour depends on size)
Anchor plate, fingerspacer and fingerhook
A simple clicker by WNS with a plastic cap to protect the arrow. The clicker can be set in different lengths by the four fixing holes.
Features WNS Clicker Mechanical 6-32:
Simple and effective
Adjustable in length
The beginners-sight by WNS for the beginning archers. It is lightweight and perfect for archers wanting to start shooting with a sight. With its printed scale it is easy to read.
Features WNS Sight SOP-10:
Lightweight
Suitable for beginners
Suitable for left- and righthanded use
The beginners extender of the SAT-line by WNS has a great value for money. This simple extender is made of carbon and aluminium which absorbs most vibrations and is meant to put the stabilizers further away to reach your ideal stability. It is available in different lengths and colours.
Features WNS Extender SAT:
Carbon extender
3, 4 or 5 inch
Black, blue, red or silv
A stick-on arrowrest by WNS. This aluminium arrowrest has an in height adjustable arm that is kept in place by a magnet, for optimum accuracy.
Available for left- and righthanded bows.
This starters sight by WNS is made of high quality aluminium and is available in silver and black. The use of aluminium instead of plastic ensures strength and more absorption of vibrations.
Features WNS Sight SJA-40 short:
Aluminium
Short extension bar
Silver or black
Left- or right handed
The beginners stabilizer by WNS has a great value for money. This simple stabilizer is made of carbon and aluminium which absorbs most vibrations. This stabilizer comes with one weight and a damper, to adjust it to your preferences. It is available in different lengths and colours.
Features WNS Stabilizer Short SAT
Carbon stabilizer
Includes a damper and a weight
10 or 12 inch
Black, blue, red or silver
The beginners stabilizer by WNS has a great value for money. This simple stabilizer is made of carbon and aluminium which absorbs most vibrations. This stabilizer comes with one weight and a damper, to adjust it to your preferences. It is available in different lengths and colours.
Features WNS Stabilizer Long SAT
Carbon stabilizer
Includes a damper and a weight
26, 28, 30 or 32 inch
Black, blue, red or silver
The SMC stabilizers are the best of the WNS stabilizers. The stabilizers are made of a durable 3K carbon which absorbs more shock. The stabilizers have an ascending thickness, 0,7 mm at the end and up to 2 mm at the base. This makes for less movement in the stabilizer and absorbs the vibrations in the length of the stabilizer (away from the bow) instead of having the vibrations send back to the bow. Only the thickness of the wall ascends, the diameter of the stabilizer stays consistent. This stabilizer is made for the archer who wants quality and performance.
Features WNS Stabilizer Short SMC:
3K carbon
Ascending stiffness over the length
Different lengths
The beginners stabilizer by WNS has a great value for money. This simple stabilizer is made of carbon and aluminium which absorbs most vibrations. This stabilizer comes with one weight and a damper, to adjust it to your preferences. It is available in different lengths and colours.
In this set:
WNS V-Bar SAT
WNS Extender SAT
WNS Stabilizer Short SAT
WNS Stabilizer Long SAT
With the WNS Explore Kit you are ready to go. This complete set has everything you need as a beginning archer. With the WNS Explore riser and the matching WNS Explore limbs you have a high quality entry bow allowing you to grow in the sport. In the spacious Avalon Classic backback you can store all your things and accesories, equipping you with everything.
What is in this set:
WNS Handle Explore DX
WNS Limbs Explore W1
Cartel Focus EX sight
Avalon Tyro or Kap Winstorm stabilizer
Avalon Classic Backpack
Fastflight string and nockingpoints
Black Eagle Intrepid carbon arrows (4x)
Cartel Triple Cushion button
Hoyt Superrest
Cartel EZY bow-stand
Avalon bowstringer
ILF recurve entry level limbs by the brand WNS. The limbs contain a combination of 2 layers of wood and fiber this combination makes these limbs flexible and comfortable to shoot and gives them a lot of accuracy even with a lower poundage. A perfect set of limbs to start with as a recurve archer.
Specs Winners (WNS) Explore W1
Material: Wood/fiber
Fitting: ILF
Lenght: Short (66 inch) – Medium (68 inch) – Long (70 inch)
Drawweight: 16 – 40 LBS
Guidelines Riser and Limbs combination
The draw weight of Olympic recurve limbs is always measured on a 25 inch riser. It is generally possible to use limbs on a smaller riser, but consider that there will be a change of draw weight, a general rule of thumb is that for every inch difference the draw weight will change 1 LBS, for example:
Medium (68 inch) limbs with a draw weight of 30 LBS with a:
1) 25 inch riser makes a 68 inch bow with a draw weight of 30 LBS
2) 23 inch riser makes a 66 inch bow with a draw weight of 32 LBS
3) 21 inch riser makes a 64 inch bow with a draw weight of 34 LBS
Also consider that draw weight of ILF limbs are generally measured at a draw lenght of 28 inch, as a rule of thumb you need to add 2 LBS of draw weight for every inch you draw more then 28 inch and vice versa. All this instructions are to be considered as GUIDELINES as the different form and construction of a limb and/or riser can give higher ore lesser results, nonetheless it is a good base to start from.
The cordovan fingertab by WNS. This tab has an aluminium base with anchor plate, finger spacer and fingerhook. All parts can be adjusted which makes it adjustable to your preferences. The leather of this tab is not regular leather, but cordovan. Cordovan is a high quality horse leather.
Specifications:
Material: Cordovan and aluminium
Sizes: Small, medium and large (colour depends on size)
Anchor plate, finger spacer and fingerhook
The WNS V-Bar SAT is an aluminium v-bar that connects the long and short stabilizers. It is made of anodised aluminium and is available in different configurations. This makes it possible to keep your stabilizers in the right place and make for a more stable shot.
Features WNS V-Bar SAT:
Aluminium v-bar
35, 40 or 45 degree
WNS Delta C3 limbs are limbs for the intermediate archer looking for an affordable carbon/wood limb. The limbs are made of a combination of carbon and wood, resulting in a very fast limb, they are build for a fast and stable performance. These limbs are designed in way that should make them torque resistant.
Specs Winners (WNS) Delta C3:
Material: Carbon/Wood
Fitting: ILF
Lenght: Short (66 inch) – Medium (68 inch) – Long (70 inch)
Drawweight: 18 – 46 LBS
Guidelines Riser and Limbs combination
The draw weight of Olympic recurve limbs is always measured on a 25 inch riser. It is generally possible to use limbs on a smaller riser, but consider that there will be a change of draw weight, a general rule of thumb is that for every inch difference the draw weight will change 1 LBS, for example:
Medium (68 inch) limbs with a draw weight of 30 LBS with a:
1) 25 inch riser makes a 68 inch bow with a draw weight of 30 LBS
2) 23 inch riser makes a 66 inch bow with a draw weight of 32 LBS
3) 21 inch riser makes a 64 inch bow with a draw weight of 34 LBS
Also consider that draw weight of ILF limbs are generally measured at a draw lenght of 28 inch, as a rule of thumb you need to add 2 LBS of draw weight for every inch you draw more then 28 inch and vice versa. All this instructions are to be considered as GUIDELINES as the different form and construction of a limb and/or riser can give higher ore lesser results, nonetheless it is a good base to start from.
The SMC stabilizers are the best of the WNS stabilizers. The stabilizers are made of a durable 3K carbon which absorbs more shock. The extender has an ascending thickness, 0,7 mm at the end and up to 2 mm at the base. This makes for less movement in the extender and absorbs the vibrations in the length of the stabilizer (away from the bow) instead of having the vibrations send back to the bow. Only the thickness of the wall ascends, the diameter of the extender stays consistent. This extender is made for the archer who wants quality and performance.
Features WNS Stabilizer Extender SMC:
3K carbon
Ascending stiffness over the length
Different lengths
This high quality carbon sight by WNS can be used for all recurve (and even compound) disciplines. Thanks to its carbon extension it is both sturdy and light. And because of its extra sturdy and precise elevation-bar this is a sight perfect for the advanced archer.
Features WNS Sight SPR-200:
Micro-click adjustable
Carbon extension
Black, blue, red or silver
The SMC stabilizers are the best of the WNS stabilizers. The stabilizers are made of a durable 3K carbon which has beter damping and absorbs more shock. The stabilizers have an ascending thickness of 0,7 mm at the end and up to 2 mm at the base. This makes for less movement in the stabilizer and absorbs the vibrations in the length of the stabilizer (away from the bow) instead of having the vibrations send back to the bow. Only the thickness of the wall ascends, the diameter of the stabilizer stays consistent. This stabilizer is made for the archer who wants quality and performance.
Features WNS Stabilizer Long SMC:
3K carbon
Ascending stiffness over the length
Different lengths
Looking for an advanced recurve bow? Then we have the perfect set for you. Composed with advanced articles, mainly by the brand WNS, making this the ideal base for you as an advanced archer.
The Motive FX is an highly adjustable anodized riser by WNS. In combination with the Motive F5 limbs by WNS it gives you both a fast and a smooth bow. The limbs are available in Fiber/Foam.
In this set:
WNS Handle Motive FX
WNS Limbs Motive F5
WNS Sight SPR-100
WNS SVT stabilizer-set
WNS Button S-PEL
WNS Arrow Rest S-RE
Avalon Classic quiver
Easton X7 Eclipse (4x)
Cartel EZY bow-stand
Avalon bowstringer
These nice looking Winners (WNS) Delta F2 limbs use the ILF system. This means you can use them with nearly all modern recurve risers. Because of the combination of wood and foam in the core, these limbs are relatively smooth and quite fast considering their price point. Since the limbs have reinforces tips you have the possibility to shoot a fast flight (or similar) material string.
Specifications Winners (WNS) Delta F2 Recurve Limbs:
Material: Foam/Wood
Fitting: ILF
String: Fast Flight
Length: Short 66″ – Medium 68″ – Long 70″
Drawweight: 16 to 40 LBS (in steps of 2 LBS)
Explanation Length Recurve Limbs
The length of recurve limbs are typically based on the use of a 25 inch riser. Most limbs come in three sizes: Short, Medium and Long. This will get you the following lengths:
Short: 66 inch bowMedium: 68 inch bowLong: 70 inch bow
WNS Motive F5 limbs are high performance limbs for the beginning and intermediate archer looking for an affordable fiber/foam limb. The limbs are made of a combination of high quality foam and fiberglass. They are build for a fast and stable performance. These limbs are designed in way that should make them torque resistant.
Specifications WNS Motive F5 Limbs:
Material: Wood/Fiber
Fitting: ILF
Lenght: Short (66 inch) – Medium (68 inch) – Long (70 inch)
Drawweight: 16 – 46 LBS (with increments of 2 lbs)
Guidelines Riser and Limbs combination
The draw weight of Olympic recurve limbs is always measured on a 25 inch riser. It is generally possible to use limbs on a smaller riser, but consider that there will be a change of draw weight, a general rule of thumb is that for every inch difference the draw weight will change 1 LBS, for example:
Medium (68 inch) limbs with a draw weight of 30 LBS with a:
1) 25 inch riser makes a 68 inch bow with a draw weight of 30 LBS
2) 23 inch riser makes a 66 inch bow with a draw weight of 32 LBS
3) 21 inch riser makes a 64 inch bow with a draw weight of 34 LBS
Also consider that draw weight of ILF limbs are generally measured at a draw lenght of 28 inch, as a rule of thumb you need to add 2 LBS of draw weight for every inch you draw more then 28 inch and vice versa. All this instructions are to be considered as GUIDELINES as the different form and construction of a limb and/or riser can give higher ore lesser results, nonetheless it is a good base to start from.
The WNS Motive C5 Carbon/Foam limbs are made for the advanced archer. The limbs are made of a combination of crossed carbon and foam, making the limb both fast and smooth.
These limbs are designed so they won’t be influenced by the weather.
Specs Winners (WNS) Motive C5:
Material: Carbon/Foam
Fitting: ILF
Lenght: Short (66 inch) – Medium (68 inch) – Long (70 inch)
Drawweight: 24 – 40 LBS
Guidelines Riser and Limbs combination
The draw weight of Olympic recurve limbs is always measured on a 25 inch riser. It is generally possible to use limbs on a smaller riser, but consider that there will be a change of draw weight, a general rule of thumb is that for every inch difference the draw weight will change 1 LBS, for example:
Medium (68 inch) limbs with a draw weight of 30 LBS with a:
1) 25 inch riser makes a 68 inch bow with a draw weight of 30 LBS
2) 23 inch riser makes a 66 inch bow with a draw weight of 32 LBS
3) 21 inch riser makes a 64 inch bow with a draw weight of 34 LBS
Also consider that draw weight of ILF limbs are generally measured at a draw lenght of 28 inch, as a rule of thumb you need to add 2 LBS of draw weight for every inch you draw more then 28 inch and vice versa. All this instructions are to be considered as GUIDELINES as the different form and construction of a limb and/or riser can give higher ore lesser results, nonetheless it is a good base to start from.
WNS Delta F3 limbs are limbs for the beginning and intermediate archer looking for an affordable limb. The limbs are made of a combination of high quality wood and fiberglass. They are build for a fast and stable performance. These limbs are designed in way that should make them torque resistant.
Specs Winners (WNS) Delta F3 Limbs:
Material: Wood/Fiber
Fitting: ILF
Lenght: Short (66 inch) – Medium (68 inch) – Long (70 inch)
Drawweight: 16 – 44 LBS (depending on length and with increments of 2 lbs)
Guidelines Riser and Limbs combination
The draw weight of Olympic recurve limbs is always measured on a 25 inch riser. It is generally possible to use limbs on a smaller riser, but consider that there will be a change of draw weight, a general rule of thumb is that for every inch difference the draw weight will change 1 LBS, for example:
Medium (68 inch) limbs with a draw weight of 30 LBS with a:
1) 25 inch riser makes a 68 inch bow with a draw weight of 30 LBS
2) 23 inch riser makes a 66 inch bow with a draw weight of 32 LBS
3) 21 inch riser makes a 64 inch bow with a draw weight of 34 LBS
Also consider that draw weight of ILF limbs are generally measured at a draw lenght of 28 inch, as a rule of thumb you need to add 2 LBS of draw weight for every inch you draw more then 28 inch and vice versa. All this instructions are to be considered as GUIDELINES as the different form and construction of a limb and/or riser can give higher ore lesser results, nonetheless it is a good base to start from.
A high quality riser by WNS. The Explore DX is a good fit for both starting and advanced archers. Meant to be used with ILF (International Limb Fitting) limbs. Because of the high extent of adjustability you can adjust the riser to your material and yourself.
Specifications Winners (WNS) Explore DX Riser
Length: 25inch
Weight: 1120 gram
Fitting: ILF
Material: Aluminium
Finish: painted
Not suited for drawweights more than 40 lbs
Damper from Winners.
Specifications:
Optimal for use on stabilizers, particularly long rod.
Reduces shock and vibration on shot execution.
Various colours available.
The WNS Motive FX is especially made for the intermediate recurve archer. The association of computer-aided design in forging and digitally-controlled machining resulted in the development of an aluminium riser that meets extremely high specs. The combination of these technologies means that rigidity, lightness and high-performance are all guaranteed. Featuring a clever weight distribution all along its inner structure, the Motive FX will help you to achieve the next level of performance.
Offcourse the Motive FX can be tuned to your needs and all the bushings for your favourite accessories are present.
Specifications Winners (WNS) Motive FX
Length: 25 inch
Weight: 1120 gram
Material: High quality forged aluminium
Colors: Matt Gray, Black, Red, Blue, Yellow , White
Finish: Anodized (except White and Yellow)
Fitting: ILF
The WNS Explore DX with the Explore W1 limbs is a nice complete bow to step into the world of ILF (International Limb Fitting). ILF risers and limbs are universal so you can swap limbs with different brands and types without having to switch riser, and the other way around.
This bow comes with a Hoyt Super rest, Avalon Tyro button and a Fast Flight+ string by Flex archery Specifications WNS Explore Bow:
Bow length: 66, 68 and 70 inch
Draw weight: 16 to 40 lbs (in steps of 2 lbs)
String: Fast Flight+
Weight riser: 1200 grams
Material riser: Aluminium
Material limbs: Wood with fiber coating
Fitting: ILF
Scope of supply WNS Explore:
WNS Explore DX riser
WNS Explore W1 limbs
Fast Flight+ string
Super rest
Avalon Tyro button
2 nock rings
Tips – bow length
Length archer
Recommended bowlength
161 – 167 cm
66 inch
168 – 175 cm
68 inch
From 176 cm
70 inch
Tips- recommended draw weight men
16-18 lbs. for youth 12 years or older 18-24 lbs. for older youth or adults who rarely exercise 24-30 lbs. for sporty men 30-40 lbs. for experienced archers
Tips- recommended draw weight women
16 lbs. for youth 12 years or older 16-20 lbs. for older youth or adults who rarely exercise 22-28 lbs. for sporty women 28-40 lbs. for experienced archers We recommend using a bow stringer when stringing your bow. By doing so, you will correctly string your bow, which considerably helps extend its lifespan.
The WNS Motive FX is specially designed for the intermediate archer. The Motive FX is fully designed for CNC machining, resulting in a beautiful riser with good shootability. The manufacturing process and design make for a stiff, relatively light weight handle for optimal performance. The Motive FX riser has all the tuning possibilities you have come to expect from an ILF riser. Specifications Winners (WNS) Motive Bow:Riser Material: High Quality AluminiumLimb material: Foam and fiber glassLength: 66, 68 of 70 inchesDraw weight: 16-46 lbs (depending on length and in 2 lbs increments)Riser weight: 1120gr.Type of string: Fast FlightColours: Matt Gray, Black, Red, Blue, Yellow, WhiteFinish: Anodised (White and yellow are painted)
The perfect riser by WNS for a beginner who wants to take that extra step. The WNS Delta LX is a bit heavier than the Explore DX because it is made of forged aluminium. This also makes it more sturdy and stable. The Delta LX can be easily adjusted with the allen keys that come with it.
Specifications WNS Delta-LX riser:
Length: 25 inch
Weight: 1200 grams
Fitting: ILF
Material: Aluminium
Finish: painted
This carbon stabilizer by WNS is ideal for the average archer. With its internal structure it absorbs more vibrations and produces a smooth and quiet shot.
Features WNS Stabilizer Long SVT:
Carbon stabilizer
26, 28, 30 and 32 inch
Black and matt black
The FC-100 limbs by WNS are made for the advanced archer. The special design has a torque-resistant effect. The combination of foam and carbon makes for a very fast and stable limb.
Specs Winners (WNS) FC-100:
Material: Foam/carbonFitting: ILFLenght: Short (66 inch) – Medium (68 inch) – Long (70 inch)Drawweight: 28 – 40 LBS
Guidelines Riser and Limbs combinationThe draw weight of Olympic recurve limbs is always measured on a 25 inch riser. It is generally possible to use limbs on a smaller riser, but consider that there will be a change of draw weight, a general rule of thumb is that for every inch difference the draw weight will change 1 LBS, for example:
Medium (68 inch) limbs with a draw weight of 30 LBS with a:1) 25 inch riser makes a 68 inch bow with a draw weight of 30 LBS2) 23 inch riser makes a 66 inch bow with a draw weight of 32 LBS3) 21 inch riser makes a 64 inch bow with a draw weight of 34 LBS
Also consider that draw weight of ILF limbs are generally measured at a draw lenght of 28 inch, as a rule of thumb you need to add 2 LBS of draw weight for every inch you draw more then 28 inch and vice versa. All this instructions are to be considered as GUIDELINES as the different form and construction of a limb and/or riser can give higher ore lesser results, nonetheless it is a good base to start from.
The Vantage AX is the premium alumunium riser from WNS. It’s 100% CNC engineered and it’s designed for stability before, during and after your shot. The matt anodized finish is absolutely beautiful and slick. Offcourse the Vantage features all tuning options and bushings you need for your favourite accessoiries.
Specifications Winners (WNS) Vantage AX:
Material: Aluminium
Length: 25 inch
Weight: 1210 grams
Fitting: ILF
Colors: Matt Black, Matt Dark Red, Matt Orange, Matt Bronze, Matt Dark Blue, Matt Gray
The WNS Motive FX is especially made for the intermediate recurve archer. The association of computer-aided design in forging and digitally-controlled machining resulted in the development of an aluminium riser that meets extremely high specs. The combination of these technologies means that rigidity, lightness and high-performance are all guaranteed. Featuring a clever weight distribution all along its inner structure, the Motive FX will help you to achieve the next level of performance.
Offcourse the Motive FX can be tuned to your needs and all the bushings for your favourite accessories are present.
Specifications Winners (WNS) Motive FX
Length: 23 inch
Weight: 1020 gram
Material: High quality forged aluminium
Colors: Matt Gray, Black, Red, Blue, Yellow , White
Finish: Anodized (except White and Yellow)
Fitting: ILF
The WNS Vantage CX is one of the more budget-friendly options if you're looking for a riser made out of carbon fiber. Because this riser is made out of carbon fiber you have the possibility to set up a bow that is light weight but does not yield structural integrity or stiffness. The way this riser is designed allows for a steady shot with little vibration upon release. This riser is also equipped with all the tuning possibilities you have come to expect in higher end risers.
Specifications Winners (WNS) Vantage CX:
Material: Carbon fiber
Length: 25 inches
Weight: 1100 grams
Fitting: ILF
Colors: Black, Blue, Red, White
Finish: Painted
The Vantage G7 limbs are made from Royal Cross Carbon, this material has proven itself in several high end Win&Win limbs. The Vantage G7 combines speed, stability and smoothness as no other without breaking the bank.
Specs Winners (WNS) Vantage G7:
Material: Foam/carbon
Fitting: ILF
Draw weight: 20 – 46 LBS (afhankelijk van lengte en in stappen van 2lbs)
Lenght: Short (66 inch) – Medium (68 inch) – Long (70 inch)
Guidelines Riser and Limbs combination
The draw weight of Olympic recurve limbs is always measured on a 25 inch riser. It is generally possible to use limbs on a smaller riser, but consider that there will be a change of draw weight, a general rule of thumb is that for every inch difference the draw weight will change 1 LBS, for example:
Medium (68 inch) limbs with a draw weight of 30 LBS with a:
1) 25 inch riser makes a 68 inch bow with a draw weight of 30 LBS
2) 23 inch riser makes a 66 inch bow with a draw weight of 32 LBS
3) 21 inch riser makes a 64 inch bow with a draw weight of 34 LBS
Also consider that draw weight of ILF limbs are generally measured at a draw lenght of 28 inch, as a rule of thumb you need to add 2 LBS of draw weight for every inch you draw more then 28 inch and vice versa. All this instructions are to be considered as GUIDELINES as the different form and construction of a limb and/or riser can give higher ore lesser results, nonetheless it is a good base to start from.
Damper from Winners.
Specifications:
Optimal for use on stabilizers, particularly short rods.
Reduces shock and vibration on shot execution.
Various colours available.
This starters sight by WNS is made of high quality aluminium and is available in silver and black. The use of aluminium instead of plastic ensures strength and more absorption of vibrations. This sight has a longer extension bar compared to the WNS Sight SJA-40.
Features WNS Sight SJA-50 Long:
Aluminium
Long extension bar
Silver or black
Left- or right handed
This carbon extender by WNS is ideal for the average archer. With its internal structure it absorbs more vibrations and produces a supple and quiet shot.
Features WNS Extender SVT:
Carbon extender
3, 4 and 5 inch
Black and matt black
A carbon recurve sight by WNS. This strong carbon sight can be used by both target and 3D archers. Because of its accuracy in adjustment it is perfect for the starting and advanced archers.
The WNS SPC-300 compound sight is designed with simplicity in mind. Besides simple it is also very durable, the carbon extension ensuring the light weight. Features WNS SPC-300: Micro-tuning for precision work Durable design Standard 10-32 threaded fitting for scope or pin Available in different colours Available for left- and righthanded archers Scope and pin are not included.
This carbon stabilizer by WNS is ideal for the average archer. With its internal structure it absorbs more vibrations and produces a supple and quiet shot.
In this set:
WNS V-Bar Carbon SVT
WNS Extender SVT
WNS Stabilizer Short SVT
WNS Stabilizer Long SVT
Specifications Winners (WNS) Explore DX Riser
Length: 21 inch
Weight: 960 gr
Fitting: ILF
Material: Aluminium
Finish: painted
Not suited for drawweights more than 40 lbs
This grip gives you the option to swap your plastic WNS grip with a wooden one. Wooden grips are often nicer with sweaty hands and easier to change to a shape you are most comfortable with.
